Netscout makes probes that can be purchased but they are expensive as is
the software required to run them.
I would think that a very small laptop could be used if you span the
port/vlan you need.
john
-----Original Message-----
From: wireshark-users-bounces@xxxxxxxxxxxxx
[mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of Laurent
Chouinard
Sent: Friday, May 02, 2008 4:36 PM
To: wireshark-users@xxxxxxxxxxxxx
Subject: [Wireshark-users] Capture hardware
Hi,
I need to capture the network data at one of my customer's location, but
big laptops with power supplies, hubs, cables and everything else
required to get a wireshark capture going is kind of a difficult problem
physically.
So I ask: Is there any hardware product whose sole purpose is to receive
an ethernet cable and record everything internally? I would leave that
device for a few days, then collect it, extract the data, and run my
analysis through Wireshark.
So far the closest thing I found is a hardware data logger that is more
of an electrical level logger to record actual electrical interferences
into the signal than the ethernet frames. Me, I just need to record the
ethernet frames so that I know what my device receives and what it
transmits.
Thanks,
Laurent
_______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users