Hi,
I've only had a very quick look, and I haven't seen the Ty interface spec, but have you checked that the vendor ID is correctly set in your AVP definition? The warning you're seeing below may need to be improved to make it clear that the vendor ID was also used in the comparison, and which one was found in the capture.
The other problem I noticed is that whereas the current dictionary.xml loads into my web browser, yours doesn't, suggesting that it may not be well-formed, which might mean that our parser also failed to load and use your AVP definition.
Hope this helps.
Martin
P.S. t couldn't hurt to update to the shiny new Wireshark 1.0 either :)
On Wed, Apr 2, 2008 at 10:31 AM, Sabyasachi Samal <
sabyasachisamal@xxxxxxxxx> wrote:
Hello Guys,
I am using wireshark version
0.99.8. I want to capture Diameter stuffs for Ty interface. I am facing problem while decode the Flow-Operation AVP having AVP code = 800.
In wireshark it is showing as
AVP Code: 800 Unknown
Unknow AVP, if you know what this is you can add it to the dictionary.xml.
I have added that but still showing same error. I am attaching the directory.xml, can any one have a look and please let me know if i have added in right way or i have to modify some thing more.
Hope for your cooperation.
--
Regards,
Sabyasachi Samal
IMS Testing Solution
Nethawk Networks India Pvt. Ltd.
Bhubaneswar
Orissa, India
_______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users