Wireshark-users: Re: [Wireshark-users] end-to-end delay calculation

From: "ximena cardozo" <ximena.cardozo@xxxxxxxxx>
Date: Thu, 13 Mar 2008 16:06:00 -0500
Cuando el habla de merging el se refiere a combinar las dos capturas, esta posibilidad se encuentra en en el menu principal de wireshar con ese nombre.

2008/3/13, Fabiana moreno <fvmoreno@xxxxxxxxx>:
Thanks for your reply! very helpful...But can you explain what do you exactly refer with merging the captures? sorry my first language isnt english. Thanks!


On 13/03/2008, Martin Mathieson <martin.r.mathieson@xxxxxxxxxxxxxx> wrote:
Then you can run a normal ping. Merge the captures, and, assuming that both journies took the same amount of time, you now know:
- the network latency (although note that ICMP may not be given the same priority as RTP./RTCP traffic)
- how much you might need to time-shift the second trace before merging to get them in the same time frame



On Thu, Mar 13, 2008 at 6:52 PM, Fabiana moreno <fvmoreno@xxxxxxxxx> wrote:
My receiver computer is running under windows and the one transmitting the video is running under linux.....How can i do this in this case???


On 13/03/2008, Rob MacKenzie <rmackenzie@xxxxxxx> wrote:

I looked at re-writing ping once to test time difference…  IF your endpoints are in the same building, consider running a wire between the parallel ports and code something to check the exact time when you flip a switch or something.  Then you would have a trigger time for both.

 


From: wireshark-users-bounces@xxxxxxxxxxxxx [mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of Martin Mathieson
Sent: March 13, 2008 12:13 PM


To: Community support list for Wireshark
Subject: Re: [Wireshark-users] end-to-end delay calculation

 

If you have console / command prompt of some type, most operating systems have a ping command that uses ICMP to test connectivity and routrip delay to a remote host and back.
But I don't know what OS or environment is running on your endpoints.

On Thu, Mar 13, 2008 at 4:05 PM, Fabiana moreno <fvmoreno@xxxxxxxxx> wrote:

how can do the ping? I dont know what this is

 

On 13/03/2008, Martin Mathieson <martin.r.mathieson@xxxxxxxxxxxxxx> wrote:

You could of course do a ping.  And see how close to the middle the far side sees something happen...

 

On Thu, Mar 13, 2008 at 2:49 PM, Fabiana moreno <fvmoreno@xxxxxxxxx> wrote:

Well i did this...but i dont know if it's ideal...i think it would work though....

I synchronized the two computers to a server on the internet before every capture so both have the exact same time.

i have my sniffer in the two computers, the one that sends and the ones that receive.

I created a function in matlab that calculates the difference between those two times...

I am being really carefull when i have a packet lost or things like that....

But probably this can work???? ...

 

On 13/03/2008, juan.wortley@xxxxxxx <juan.wortley@xxxxxxx> wrote:

Hi Fabiana,

 

the only way to do that is if you know the time difference between the machines.

It´s not so easy however if you use windows you could try synchronizing both endpoints by using:

w32tm /config /manualpeerlist:[IP to synchronize to] /update /syncfromflags:MANUAL

 

and then monitor the time difference with:

w32tm /stripchart /computer:[IP to synchronize to]

 

,you always can have a delay reference by pinging and dividing by 2 the RTT.

 

HTH

Juan

 

 


From: wireshark-users-bounces@xxxxxxxxxxxxx [mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of ext Fabiana moreno
Sent: Miércoles, 12 de Marzo de 2008 09:38 a.m.
To: Community support list for Wireshark
Subject: Re: [Wireshark-users] end-to-end delay calculation

so ... it is not reliable if i substract the time i hav in the client minus the time i have in the server to get my end the end delay? 

On 12/03/2008, Hansang Bae <hbae@xxxxxxxxxx> wrote:

Fabiana moreno wrote:
> Hello there,
>
> I know wireshark is not able to calculate the end-to-end delay of a
> packet when streaming. I was just wondering if adjusting the clocks of
> my two computers(sender and receiver) to the network time protocol and
> having the sniffer at both ends i could calculate the end-to-end-delay
> tracing each packet. Does this sound logical?
>


It is within the limits of ntp.  Unless there is a WAN involved, the
packets are flying around at an order of magnitude faster than what ntp
can provide (ms resolution)

--

Thanks,
Hansang
_______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users

 


_______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users

 


_______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users

 


_______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users

 


_______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users

 

---------------------------------------------------------------------
This transmission (including any attachments) may contain confidential information, privileged material (including material protected by the solicitor-client or other applicable privileges), or constitute non-public information. Any use of this information by anyone other than the intended recipient is prohibited. If you have received this transmission in error, please immediately reply to the sender and delete this information from your system. Use, dissemination, distribution, or reproduction of this transmission by unintended recipients is not authorized and may be unlawful.

_______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users


 

_______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users



_______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users



_______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users