Wireshark-users: Re: [Wireshark-users] Wireshark doesnt recognize RTP packets when i decode

From: Jehanzeb Khan <jehanzeb.khan@xxxxxxxxx>
Date: Wed, 5 Mar 2008 20:31:25 -0800 (PST)
Hello Fabiana
 I am not sure what do you mean by trying to decode rtcp/rtp packets to udp. As far as i know rtp/rtcp packets should be carried over udp which should be carried over ip (rtp/udp/ip).
 
 Do you see any UDP packets when capturing the data?
 
Regards
Jehanzeb Khan


----- Original Message ----
From: Fabiana moreno <fvmoreno@xxxxxxxxx>
To: Community support list for Wireshark <wireshark-users@xxxxxxxxxxxxx>
Sent: Thursday, March 6, 2008 4:08:09 AM
Subject: Re: [Wireshark-users] Wireshark doesnt recognize RTP packets when i decode

Well it's my final year project and i need to analyse the QoS parameters when streaming over wireless lan.
I'm streaming an mpeg4 video from a server to my client (the last one is the one where wireshark is installed)
So im trying to to capture all the packets im getting when streaming.
My server supports rtcp/rtp and i think (correct me if im wrong) that the best way to analyse all these packets are to decode them to udp and then to rtp but im getting the problem mentioned before.
 
But is there some way i can fix this?

 
On 05/03/2008, Jaap Keuter <jaap.keuter@xxxxxxxxx> wrote:
Well, I dont' really understand what you do, but the PT=unknown is from the
fact that this packet type is dynamically assigned, negotiated between
parties. If Wireshark doesn't see the negotiations, it can't make out which
codec goes with PT 96. So yes, it can happen you see this.

Thanx,
Jaap


Fabiana moreno wrote:
> hello!!!
> I'm streaming an mpeg4 video with darwin streamer server trhough my
> WLAN. I'm using wireshark to analyse the packets im receiving.
> I see TCP/RTSP packets but when i decode to UDP and then to RTP to
> anlyse it, wireshark shows the following in all the packets, here a sample:
>
> 34    0.253327    192.168.123.100 <http://192.168.123.100/>
> 192.168.123.101 <http://192.168.123.101/>    RTP    PT=Unknown (96),
> SSRC=0x4B6C00C, Seq=65416, Time=1531529067
>
> is this what i suppose to see? any suggestions in how to analyse packets
> im receiving while streaming? please help!! im new
>
>

_______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users



-----Inline Attachment Follows-----

_______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users



Never miss a thing. Make Yahoo your homepage.