["Luis EG Ontanon" <luis@xxxxxxxxxxx>]

is the wimax plugin built for the same release you are trying to use it?


On Feb 11, 2008 4:22 PM, Martin, Jack <Jack.Martin@xxxxxxxxxxx> wrote:
>
>
>
>
> You are correct, I did not build Wireshark myself – I downloaded the
>
> official 0.99.7 version (several times just to make sure).
>
>
>
> I'll attach the capture file I use but others have used 0.99.7 to open this
>
> same capture file without any issue.  I would not be surprised if you can
>
> open the file successfully.  Note that I have tried 4 or 5 different
>
> capture files and each time I crash.  I do not capture the file(s)
>
> myself, I am only trying to open a file that was captured by another
>
> device.  Others can open this file and I can open other files that do not
>
> contain WiMAX.
>
>
>
> I can not narrow it down to a frame since when I try and open the file it
>
> crashes before any frames are displayed.  If I disable WiMAX ASN CP
>
> protocol I can open the file but as soon as I enable that protocol
>
> (for example after the file is open) it crashes.
>
>
>
>
>
> Thanks.
>
>  ________________________________
>
>
> From: wireshark-users-bounces@xxxxxxxxxxxxx
> [mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of Martin Mathieson
>  Sent: Monday, February 11, 2008 10:13 AM
>
>
>  To: Community support list for Wireshark
>  Subject: Re: [Wireshark-users] Wireshark crash with WiMAX capture file
>
>
>
>
>
> Most likely Wireshark is crashing because of a bug in the wimaxasncp
> dissector.
>
>  If you are able to send (attach to a bug) a capture file that causes this
> problem, I can try to debug it.  You can always try to trim the message down
> to one frame (disable, wimaxasncp, save the displayed frames, etc until you
> narrow it down to the frame that causes the problem.
>
>  If you can't send in a capture file, you'll need to try to get the stack at
> the point where it crashes (it looks like you're using the official 0.99.7
> release, so I'm guessing you didn't build Wireshark yourself).  You could
> try using the most recent development build from
> http://www.wireshark.org/download/automated/win32/, although I don't believe
> the wimaxasncp dissector has been changed since the release.
>
>
> On Feb 11, 2008 3:02 PM, Martin, Jack <Jack.Martin@xxxxxxxxxxx> wrote:
>
>
>
> Here's all I have … (when I open any capture file that has WiMAX R6 messages
>
> I get the error and Wireshark closes – nothing is shown in the wireshark
>
> window before it closes).
>
>
>
>
>
>
>
>  ________________________________
>
>
> From: wireshark-users-bounces@xxxxxxxxxxxxx
> [mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of Martin Mathieson
>  Sent: Monday, February 11, 2008 9:56 AM
>  To: Community support list for Wireshark
>  Subject: Re: [Wireshark-users] Wireshark crash with WiMAX capture file
>
>
>
>
>
> Hi,
>
>  Could you post a capture file showing the problem?
>
>  Best add whatever details you can to bugilla (http://bugs.wireshark.org).
>
>  Martin
>
>
>
>
> On Feb 11, 2008 2:36 PM, Martin, Jack <Jack.Martin@xxxxxxxxxxx> wrote:
>
>
>
> I downloaded the latest version of Wirshark (0.99.7), but when I try and
>
> open a capture file that has WiMAX messages (R6 messages) I get a
>
> windows error report and Wireshark closes.  If I disable the WiMAX ASN CP
>
> protocol I am able to open the file but obviously can not decode the
>
> WiMAX messages.
>
>
>
> I can open (and decode) files with other protocols ( AAA, SIP, GTP, etc …),
>
> it appears as if WiMAX is the only thing I'm having trouble with.
>
>
>
> Any suggestions on how to fix my issue?
>
>
>
> Regards.
>
>
>
>
>
>
>  E-mail confidentiality.
>  --------------------------------
>  This e-mail contains confidential and / or privileged information belonging
> to Spirent Communications plc, its affiliates and / or subsidiaries. If you
> are not the intended recipient, you are hereby notified that any disclosure,
> copying, distribution and / or the taking of any action based upon reliance
> on the contents of this transmission is strictly forbidden. If you have
> received this message in error please notify the sender by return e-mail and
> delete it from your system. If you require assistance, please contact our IT
> department at helpdesk@xxxxxxxxxxx.
>
>  Spirent Communications plc
>  Northwood Park, Gatwick Road, Crawley, West Sussex, RH10 9XN, United
> Kingdom.
>  Tel No. +44 (0) 1293 767676
>  Fax No. +44 (0) 1293 767677
>
>  Registered in England Number 470893
>  Registered at Northwood Park, Gatwick Road, Crawley, West Sussex, RH10 9XN,
> United Kingdom.
>
>  Or if within the US,
>
>  Spirent Communications,
>  26750 Agoura Road, Calabasas, CA, 91302, USA.
>  Tel No. 1-818-676- 2300
>
>
>  _______________________________________________
>  Wireshark-users mailing list
>  Wireshark-users@xxxxxxxxxxxxx
>  http://www.wireshark.org/mailman/listinfo/wireshark-users
>
>
>
>
>
>
>
>
>
>
>  E-mail confidentiality.
>  --------------------------------
>  This e-mail contains confidential and / or privileged information belonging
> to Spirent Communications plc, its affiliates and / or subsidiaries. If you
> are not the intended recipient, you are hereby notified that any disclosure,
> copying, distribution and / or the taking of any action based upon reliance
> on the contents of this transmission is strictly forbidden. If you have
> received this message in error please notify the sender by return e-mail and
> delete it from your system. If you require assistance, please contact our IT
> department at helpdesk@xxxxxxxxxxx.
>
>  Spirent Communications plc,
>  Northwood Park, Gatwick Road, Crawley, West Sussex, RH10 9XN, United
> Kingdom.
>  Tel No. +44 (0) 1293 767676
>  Fax No. +44 (0) 1293 767677
>
>  Registered in England Number 470893
>  Registered at Northwood Park, Gatwick Road, Crawley, West Sussex, RH10 9XN,
> United Kingdom.
>
>  Or if within the US,
>
>  Spirent Communications,
>  26750 Agoura Road, Calabasas, CA, 91302, USA.
>  Tel No. 1-818-676- 2300
>
>
>  _______________________________________________
>  Wireshark-users mailing list
>  Wireshark-users@xxxxxxxxxxxxx
>  http://www.wireshark.org/mailman/listinfo/wireshark-users
>
>
>
>
>
>
> E-mail confidentiality.
> --------------------------------
> This e-mail contains confidential and / or privileged information belonging
> to Spirent Communications plc, its affiliates and / or subsidiaries. If you
> are not the intended recipient, you are hereby notified that any disclosure,
> copying, distribution and / or the taking of any action based upon reliance
> on the contents of this transmission is strictly forbidden. If you have
> received this message in error please notify the sender by return e-mail and
> delete it from your system. If you require assistance, please contact our IT
> department at helpdesk@xxxxxxxxxxx.
>
> Spirent Communications plc,
> Northwood Park, Gatwick Road, Crawley, West Sussex, RH10 9XN, United
> Kingdom.
> Tel No. +44 (0) 1293 767676
> Fax No. +44 (0) 1293 767677
>
> Registered in England Number 470893
> Registered at Northwood Park, Gatwick Road, Crawley, West Sussex, RH10 9XN,
> United Kingdom.
>
> Or if within the US,
>
> Spirent Communications,
> 26750 Agoura Road, Calabasas, CA, 91302, USA.
> Tel No. 1-818-676- 2300
>
>
> _______________________________________________
> Wireshark-users mailing list
> Wireshark-users@xxxxxxxxxxxxx
> http://www.wireshark.org/mailman/listinfo/wireshark-users
>
>



-- 
This information is top security. When you have read it, destroy yourself.
-- Marshall McLuhan