Hi,
I’ve checked in a
change to “Add a preferense to decode a dynamic payload type as
H263-1998/H263-2000”
Committed revision 24153.
You can download a
development build for Windows in a few hours from http://www.wireshark.org/download/automated/
Regards
Anders
Från:
wireshark-users-bounces@xxxxxxxxxxxxx
[mailto:wireshark-users-bounces@xxxxxxxxxxxxx] För Anders Broman
Skickat: den 21 januari 2008 21:27
Till: 'Community
support list for Wireshark'
Ämne: Re: [Wireshark-users] How to
decode H264 ?
Hi,
If the stream is set up
with SIP H323(H.245) MEGACO/H.248 or RTSP and those packets are in the trace
Wireshark will be able to
Determine the payload
type and UDP ports used and decode RTP and payload.
Regards
Anderes
Från: wireshark-users-bounces@xxxxxxxxxxxxx
[mailto:wireshark-users-bounces@xxxxxxxxxxxxx] För list mail
Skickat: den 21 januari 2008 19:14
Till: Community
support list for Wireshark
Ämne: Re: [Wireshark-users] How to
decode H264 ?
Get setup info in the trace? I do not understand it, can you please
tell me how ?
2008/1/22, Anders Broman <a.broman@xxxxxxxxx>:
Hi,
That's currently not possible but if you do get
the setup info in the trace I think it would decode.
Regards
Anders
Hi
Anders, thank you very much. I have got it for H264.
Another
problem, for H263+, it's using the dynamic payload type too, but I do not
found it in Edit->prefrences->protocols.
How to
decode the H263+ ?
2008/1/22,
Anders Broman <
anders.broman@xxxxxxxxxxxx>:
Hi,
H264 "decoding" (only minimal decoding is made), is only available
from WS 0.99.7 and
bugfixes has gon in since the release.(development builds available)
If you haven't got the setup information in your trace there is the option to
do
Edit->prefrences->protocols->h264 and set the Payload type 125 in your case. You still
have to
do decode as RTP every time you open the trace.
Regards
Anders
________________________________
From: wireshark-users-bounces@xxxxxxxxxxxxx
on behalf of list mail
Sent: Mon 1/21/2008 4:20 PM
To: wireshark-users@xxxxxxxxxxxxx
Subject: [Wireshark-users] How to decode H264 ?
Hi all, I'm new to Wireshark, it's a great software. Currently I using it to
analyse the H264 RTP video stream.
When I captured the H264 RTP video stream, and try to decodec it - use the
menu" Decodec As..." and choosed "RTP" to decode it,
but it just show me: "PT=Unknown (125), SSRC=0xD2D9EB2, Seq=35012,
Time=4266020486, Mark ",
So there have anybody can help me how to decodec it as H264 ?
Thank you in advance.
_______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users
_______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users