Steve
It's for all UDP traffic on a specific port. I'm currently on Windows
XP, but if a flavour of Linux makes it easier, then so be it.
Neil Owens
Support Specialist
Room 4240 TVC
Wood Lane
London, W12 7RJ
+44(0) 20 8225 8685 (GMT)
http://www.enps.com
-----Original Message-----
From: wireshark-users-bounces@xxxxxxxxxxxxx
[mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of Stephen
Fisher
Sent: 21 November 2007 17:12
To: Community support list for Wireshark
Subject: Re: [Wireshark-users] How do I go about creating a custompacket
data decode
On Wed, Nov 21, 2007 at 01:59:54PM -0000, Owens, Neil wrote:
> I'm up against it here and just need to (simply?) XOR all packet data
> with a HEX value. I just don't know enough about Wireshark to be able
> to do this . While I'm not asking for a complete solution could
> someone point me at something a little more specific than the
> Wireshark Users manual and possibly hold me hand a little?
Is this for a specific protocol/port? Are you running on Windows or
some type of Unix?
Steve
_______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users
The information contained in this communication is intended for the use
of the designated recipients named above. If the reader of this
communication is not the intended recipient, you are hereby notified
that you have received this communication in error, and that any review,
dissemination, distribution or copying of this communication is strictly
prohibited. If you have received this communication in error, please
notify The Associated Press immediately by telephone at +44-20-7427-4202
and delete this email. Thank you.
[IP_UK_DISC]
msk dccc60c6d2c3a6438f0cf467d9a4938