|
You're definitely right about it being WinPCap... I get the
same result when simply running windump on that interface.. My situation
is a little different than the gentleman's that started this
thread..
1) I have NO software firewall running
2) I am using AT&T AGN client 6.3
When attempting to capture, I am capturing on the VPN
Interface... I can see the outbound packets but no responses come back... This
gives the appearance of network traffic being blocked completely because
applications are not getting their responses. Once I stop the capture,
normal operation resumes.
Joe Morsbach
Sr. Technical
Specialist
AT&T Integrated Mobile
Services
908.824.9007 (Single Reach)
AIM:
sta49fireboy
Yahoo!: sta49fireboy
This is definitely a WinPcap issue and not a wireshark one
(wireshark receives packets from WinPcap).
I would say that either the Symantec firewall, the VPN client
or the AT&T ipsec client (is that an ipsec client or a firewall) are
interacting really badly with the WinPcap protocol driver.
Can you please try disabling the AT&T firewall? Also, from
which adapter are you trying to capture? The ethernet adapter or on the
VPN?
Have a nice day
GV
----- Original Message -----
Sent: Monday, November 12, 2007 12:03
PM
Subject: Re: [Wireshark-users] Starting
Wireshark Capture Blocks NetworkTraffic
Was there ever
resolution to this? I am having the same trouble.
Thanks
From: David Pruitt < djpruitt@xxxxxxxxxx> Date:
Fri, 6 Apr 2007 11:28:18 -0400 AT&T Network Client - IBM Version 5.09.2
Firewall name and version is AT&T IPSec
Application version 5.09.2 Service is
Managed VPN - IPSec Dual Access Microsoft Windows XP 5.01.2600 SP2 Also have Symantec Client Firewall installed but currently
disabled.
Thank
You!
David J. Pruitt
"Gianluca Varenni"
<gianluca.varenni@xxxxxxxxxxxx>
Sent by:
wireshark-users-bounces@xxxxxxxxxxxxx
04/06/2007 11:13 AM
|
Please respond
to
Community support list for Wireshark
<wireshark-users@xxxxxxxxxxxxx> |
|
|
To
| "Community support list for
Wireshark" <wireshark-users@xxxxxxxxxxxxx>
|
|
cc
|
|
|
Subject
| Re: [Wireshark-users] Starting
Wireshark Capture Blocks Network
Traffic |
| Which VPN client are you using?
Have a nice day GV ----- Original Message ----- From:
David Pruitt To: wireshark-users@xxxxxxxxxxxxx
Sent: Friday, April 06, 2007 7:52 AM
Subject: [Wireshark-users] Starting Wireshark Capture
Blocks Network Traffic
Hello,
I downloaded and installed Wireshark version 0.99.5 with WinPcap
4.0 and am trying to capture some detailed TCP/IP packet transmissions from my
client application connecting via DSL using VPN software to connect to a
remote server on my business WAN. Once I start the Wireshark capture,
all of my applications on the client side cannot connect to my work network
over the VPN connection. I am able to access other web sites not using
the VPN. Any suggestions would be appreciated.
Thank You!
David J.
Pruitt
_______________________________________________
Wireshark-users
mailing
list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users
|