["Kaushal Shriyan" <kaushalshriyan@xxxxxxxxx>]

Thanks and what does s 0 signifies, I know s means snapshot length so what does s 0 signifies in the command

tcpdump -i eth0 -s 0 -w dump host 192.168.0.1 and host 
192.168.0.2 and port 443 

Thanks 

Kaushal

On 7/19/07, Les Bowditch <les.bowditch@xxxxxxxxxxxxxxxxx > wrote:

Do you just want traffic between 192.168.0.1 AND 192.168.0.2?  If so, that should work.

 

Les Bowditch Senior Network Operations Analyst

Shift Networks Suite 320, 1121 Centre Street NW Calgary, AB T2E 7K6 Tel: +1 (403) 536-5491 Tel: +1 (866) 963-8749 Fax: +1 (403) 770-7449 les.bowditch@xxxxxxxxxxxxxxxxx www.shiftnetworks.com CONFIDENTIALITY NOTICE: The contents of this electronic mail message are confidential and strictly reserved for the sole use of Shift Networks Inc. and the recipient(s) indicated in the message. If you receive this message in error, please notify the sender immediately and delete the original message as well as all copies. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. Any disclosure, copying, distribution or reliance on the contents of the information is strictly prohibited. Thank you for your cooperation. Shift Networks Inc.

 

---

From: wireshark-users-bounces@xxxxxxxxxxxxx [mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of Kaushal Shriyan
Sent: Thursday, July 19, 2007 6:24 AM
To: Community support list for Wireshark
Subject: [Wireshark-users] tcpdump command to capture https traffic

 

Hi

I want to capture HTTPS Traffic using tcpdump command

tcpdump -i eth0 -s 0 -w dump host 192.168.0.1 and host 192.168.0.2 and port 443

is the above command correct, please let me know

Best Regards

Kaushal

_______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users