also check the duplex settings in case you have a duplex mismatch.
On 5/22/07, Mike Ciccone <mciccone@xxxxxxxxx> wrote:
Martin/Stephen
Thanks for the answers... I'm on travel at the moment and won't be back to
look at this problem until Monday. I did check for ACL's and Firewalls
Blocks but I am not finding any... I'll keep looking.
Thanks,
Michael Ciccone
Network Engineer
eToys Direct, Inc.
Office: 303-226-8617
Cell: 720-299-1573
Fax: 303-226-8600
http://www.etoys.com
"Visser, Martin" <martin.visser@xxxxxx>
Sent by: wireshark-users-bounces@xxxxxxxxxxxxx
05/21/2007 06:05 PM
Please respond to
Community support list for Wireshark <wireshark-users@xxxxxxxxxxxxx>
To
"Community support list for Wireshark" <wireshark-users@xxxxxxxxxxxxx>
cc
Subject
Re: [Wireshark-users] Help with Output "TCP Dup ACK3#2 1320 > 22 ACK
Duplicate ACKs are fairly common, so they don't always indicate a problem.
During normal congestion you will receive duplicate ACKs if the far end
has not received a TCP segment it believes it should have. It also can be
used to keep alive a connection.
However if you get dup ACKs consistently at the start of a connection it
might mean that there is some sort of firewall ACL blocking traffic. As
Stephen said, it is important to know where this occurs during the 3 way
handshake at the beginning of a connection or later on.
Martin Visser
Technology Consultant
Consulting & Integration
Technology Solutions Group - HP Services
410 Concord Road
Rhodes NSW 2138
Australia
Mobile: +61-411-254-513
Fax: +61-2-9022-1800
E-mail: martin.visserAThp.com
This email (including any attachments) is intended only for the use of the
individual or entity named above and may contain information that is
confidential, proprietary or privileged. If you are not the intended
recipient, please notify HP immediately by return email and then delete
the email, destroy any printed copy and do not disclose or use the
information in it.
From: wireshark-users-bounces@xxxxxxxxxxxxx
[mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of Mike Ciccone
Sent: Saturday, 19 May 2007 7:57 AM
To: wireshark-users@xxxxxxxxxxxxx
Subject: [Wireshark-users] Help with Output "TCP Dup ACK3#2 1320 > 22 ACK
Hello,
I am having a problem with SSH. I can ssh from some server but not
others. I verified that there are no access-lists blocking from doing
this. When I ran Wireshark on my pc and tried to ssh to the server I get
the following line that could be telling me what the problem is. However,
I don't understand it and was hoping some out there could explain it to
me.
Here is the line:
[TCP Dup ACK 3#2] 1320 > 22 [ACK] Seq=1 Ack=1 win=65535 Len=0
Does this mean anything to anyone? I'm guessing my problem lies here. If
I ssh to a server that works... I don't see this line
Thanks
Mike C. _______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users