Hello
First, sorry for my bad english... :-)
I have a general question about the way Wireshark decodes Diameter AVP. Is the "ApplicationID" taken into account when Wireshark decodes an AVP ?
Example :
- in 3GPP CX/DX Application(ID=16777216, 3GPP TS 29.228 and 29.229), the AVP code 1 is "Visited-Network-Identifier". The vendor-Id for this AVP is TGPP (10415)
- in 3GPP Gmb Application (ID=16777223, 3GPP TS 29.061), the AVP code 1 is "3GPP-IMSI". The vendor-Id for this AVP is also TGPP (10415)
I created my own dictionnary for 3GPP Gmb Application and, normally, Wireshark should display the right name according to the "ApplicationID" but I don't think it is the case... Wireshark always displays me the value in 3GPP Gmb dictionnary. If I erase the AVP code 1 from my "3GPP Gmb" dictionnary, it displays the
AVP name contained in the "3GPP CD/DX" dictionnary...as if it doesn't take into account the ApplicationID...
Is it normal ? Do I make a mistake somewhere in my understanding ?
Thanks by advance
Xavier
D�couvrez une nouvelle fa�on d'obtenir des r�ponses � toutes vos questions !
Profitez des connaissances, des opinions et des exp�riences des internautes sur
Yahoo! Questions/R�ponses.