Wireshark-users: Re: [Wireshark-users] Diameter unknown AVPs

From: "Frederiek Debruyne" <fdebruyne@xxxxxxxxxxxx>
Date: Mon, 26 Feb 2007 09:09:43 +0100
Title: [Wireshark-users] Diameter unknown AVPs

Hi Anders,

 

Did you receive the sample file? Is the Volume-Quota-Threshold AVP recognized in your case?

 

Regards,

 

Frederiek

 


From: wireshark-users-bounces@xxxxxxxxxxxxx [mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of Anders Broman (AL/EAB)
Sent: vrijdag 23 februari 2007 16:42
To: Community support list for Wireshark
Subject: SV: [Wireshark-users] Diameter unknown AVPs

 

Hi,

That should suffice, can you send me a small sample file?

Best regards

Anders

 


Från: wireshark-users-bounces@xxxxxxxxxxxxx genom Frederiek Debruyne
Skickat: fr 2007-02-23 16:27
Till: Community support list for Wireshark
Ämne: Re: [Wireshark-users] Diameter unknown AVPs

Hi,

 

The “Attempt to load/use Diameter XML Dictionary” checkbox, in the preferences for Diameter, is checked.

The Diameter XML dictionary is set to “C:\Program Files\Wireshark\diameter/dictionary.xml”.

 

The Volume-Quota-Threshold AVP (code 869) is not recognized. This AVP is not defined by IETF RFC 3588, but by a 3GPP specification.

 

I am not that familiar with XML, though I noticed the occurrence of following lines in file chargecontrol.xml:

 

<avp name="Volume-Quota-Threshold" code="869" mandatory="must" may-encrypt="no" protected="may" vendor-bit="must" vendor-id="TGPP">

<type type-name="Unsigned32"/>

</avp>

 

I’m not sure whether this should be sufficient. It does not seem to be, since the AVP is still not recognized.

 

Regards,

 

Frederiek


From: wireshark-users-bounces@xxxxxxxxxxxxx [mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of Anders Broman (AL/EAB)
Sent: vrijdag 23 februari 2007 16:04
To: Community support list for Wireshark
Subject: SV: [Wireshark-users] Diameter unknown AVPs

 

Hi,

AVP:s can be dissected either by the data in the file packet-diameter-defs.h or by the Diameter

XML files if those preferences are set. See the wiki page for details.

The XML library is more updated than the file. What AVP:s are not recognised?

 

Best regards

Anders

 


Från: wireshark-users-bounces@xxxxxxxxxxxxx genom Frederiek Debruyne
Skickat: fr 2007-02-23 15:33
Till: wireshark-users@xxxxxxxxxxxxx
Ämne: [Wireshark-users] Diameter unknown AVPs

Hi,

I frequently use Wireshark to analyze Diameter protocol traffic. I
notice that not all AVPs are recognized. That is, the packet details
frame contains a line with "Unknown AVP" in that case. What must be done
to make Wireshark recognize these AVPs?

I am using the latest Wireshark version, i.e. version 0.99.5.

Regards,

Frederiek


This email has been processed by SmoothZap - www.smoothwall.net

_______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users



This email has been processed by SmoothZap - www.smoothwall.net



This email has been processed by SmoothZap - www.smoothwall.net