Maybe you could change the MAC-address of the Wireless card (or bridge?)
to the MAC-address of the gateway in the network? That way your NIC will
accept all traffic going to and from the gateway (and you because you
have the same MAC-address). Because the MAC-adress in those packets is
the same as your MAC-address it'll accept the packets. Although there
migh be some conflicts, maybe you could also turn off ARP on your
computer so it doesn't confuse the rest of the network.
On Tue, 2 Jan 2007 09:17:29 -0500, "Small, James"
<JSmall@xxxxxxxxxxxxxx> said:
> Yep--that's it. Thanks Guy.
>
> Also, just for the record, I tried capturing under WinPcap under XP, SP2
> both using the Microsoft Bridge and just using my wireless adapter in
> non-promiscuous mode (Intel Pro Wireless 2200BG built-in to a Dell
> Latitude D610).
>
> My particular wireless card will only capture if I don't enable
> promiscuous mode. Interestingly enough, if I don't have the Microsoft
> Bridge installed with the wireless card as a bridge adapter, then I
> won't see multicast traffic groups that my host didn't join (in other
> words I don't see most multicast traffic). Once I setup the Microsoft
> Bridge, then I can capture normally (using promiscuous mode) using the
> bridge and all multicast traffic shows up using either the bridge or the
> wireless card (although still must capture on wireless card with
> promiscuous mode off).
>
> Note that in any case, I can not see non-broadcast/non-multicast traffic
> which is not destined to my wireless card. For this you would need the
> AirPcap adapter.
>
> --Jim
>
> > -----Original Message-----
> > From: wireshark-users-bounces@xxxxxxxxxxxxx [mailto:wireshark-users-
> > bounces@xxxxxxxxxxxxx] On Behalf Of Guy Harris
> > Sent: Friday, December 29, 2006 3:17 PM
> > To: Community support list for Wireshark
> > Subject: Re: [Wireshark-users] I see no captured packets at all
> >
> > Small, James wrote:
> >
> > > Unfortunately, many wireless cards in Windows do not allow you to do
> > > network captures. I use to have a link to a web site that explained
> it
> > > all and had a list of Wireless NICs/Chipsets and which ones worked
> or
> > > didn't work for network captures but now I can't find it.
> >
> > You might be thinking of
> >
> > http://www.micro-logix.com/WinPcap/Supported.asp
> >
> > which is linked to from
> >
> > http://wiki.wireshark.org/CaptureSetup/WLAN
> >
> > which gives information on wireless captures on various OSes,
> including
> > Windows (and also mentions the AirPcap adapter).
> > _______________________________________________
> > Wireshark-users mailing list
> > Wireshark-users@xxxxxxxxxxxxx
> > http://www.wireshark.org/mailman/listinfo/wireshark-users
> _______________________________________________
> Wireshark-users mailing list
> Wireshark-users@xxxxxxxxxxxxx
> http://www.wireshark.org/mailman/listinfo/wireshark-users
--
Hans Nilsson
hasse_gg@xxxxxxxx
--
http://www.fastmail.fm - Send your email first class