What about:
tcp.port==22
Normally an SSH Server/Service/Daemon listens on TCP Port 22.
If the SSH end point is on a different port, then you can filter on the
server port (e.g. tcp.port==60022) and right click on a packet and
select decode as, and choose SSH.
Hope this helps,
--Jim
> -----Original Message-----
> Hi all,
>
> Can anybody tell me how can I capture packets which belong to SSH
> connection? When I establish a SSH connection, even all SSH packets
are
> shown as TCP packets however I have set the filter to capture all
packets.
>