Jack Jackson wrote:
Sure. It only captures destination packets because you are only checking
the destination address. You need to also check for the source
address. Assuming you want packets whose source or destination address is
in the range:
(ether[0:4]>=0x00804400 and ether[0:4]<=0x008044ff) or
(ether[6:4]>=0x00804400 and ether[6:4]<=0x008044ff)
doh! Of course. Thanks. :)
_______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users