["Anders Broman \(AL/EAB\)" <anders.broman@xxxxxxxxxxxx>]

Hi,

This is not an problem per se you can just ack the pop ups.

The reason for the messages are that some frames are recognised as Diameter frames and you haven't got the libxml2.dll

in your Wireshark direcory. See the wiki page on Diameter.

Check also the preferences for Diameter and untick Attempt to load/use Diameter XML Dictionary if you don't want these

warning messages. Using the xml files gives a better dissection of Diameter.

/ Anders

---

From: wireshark-users-bounces@xxxxxxxxxxxxx [mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of Keith French
Sent: den 1 november 2006 17:06
To: Wireshark-Users
Subject: [Wireshark-users] Problem Opening 8M capture in Wireshark V0.99.4

I have just noticed a problem when trying to open some 8M trace files in Wireshark V0.99.4.

 

Part way through the load process you get two errors:-

 

"Diameter: Using static dictionary! (Unable to use XML)"

"XMLStub: Unable to open module libxml2.dll"

 

Also the same happens in V0.99.3.

These traces are mainly H323 & RTP and were taken using Netasyst capturing to multiple 8M files (this is probably not the issue though). Some files from the set load OK, whilst some suffer this problem.

Alas I cannot provide an example trace as these were taken on a customer's live network, but I will try to see if I can recreate the problem in the lab.

 

Any ideas?

Keith French.