[Ivan Nardi <nardi.ivan@xxxxxxxxx>]

Hi

I work with sctp pcaps very often and I have always found that Wireshark doesn't handle them in a practical way

The far biggest issue is the display filter logic

As a workaround, I have to externally pre-process the traces and "de-chunk" the sctp packets: when every sctp packet contains only one chunk everything works like a charm, as usual

From a user point of view, I would like an improvement in the display filters:

* you should be able to match a specific sub-packet. I mean, when the filter is something like "sccp.xxx == AAAA && gsm_a.yyyy == BBBB" I do expect the matched fields to be on the same sub-packet, not on different chunks of the same sctp packet. AFAIK one way to achieve this goal is forcing all protocol fields above sctp (or any other "aggregating" protocol) to be per sub-packets, not per packets (as today). In this way, there shouldn't be multiple fields anymore

* when there is a display filter (involving sub-protocol fields), only matching sub-packets should be visualized in the packet list

* you should be able to export only visualized sub-packets in a valid file.

Just my 2 cents, based on my personal workflow

I fully understand that my wish-list requires a huge amount of work; improving only the visual representation of the packets/sub-packet should be an important step forward anyway

I don't have the expertize to write GUI or "core" code, but I am more than willing to test any solutions

Thank you very much for bringing up this topic

Ivan

On Mon, 2 Jul 2018 21:19 Darien Spencer, <cusneud@xxxxxxxx> wrote:

Hey devs

There's something that has been bothering me in my wireshark experience and I wanted to bring to discussion

Some protocols can aggregate several payloads such as SCTP and TCP

Viewing those in wireshark could be difficult if many payloads are present.

Specificly the Info column gets long quickly (assuming fences are used)

 

Here is an example - the info column of a SCTP packet with 6 payloads:

https://i.imgur.com/GeA2WmU.png

 

It can be challenging to spot a specific packets in those overpopulated info columns

further more, once you find the right packet by the info column you are served with your next challenge -

finding which of the aggregated packets in the protocol tree is the one you are looking for.

 

I was thinking about introducing a newer concept to wireshark in the form of "sub-packets"

Maybe that's a cosmetic feature to add to the Qt GUI and maybe it required some changes to the dissection engine. I'm not familiar enought with the GUI to tell.

What I had in mind is an option to 'expend' a packet in the main view so its aggregated sub packets are seen in a tree under it

Here's a mock hoping it's get the idea across:

https://i.imgur.com/WfSvg6x.png

 

I can imagine how this might require a change to the way info is saved in the dissectors.

 

 

Does anyone else feel this is an issue when analysing traffic?

Is this a feature fitting the GUI/User experience guidelines of wireshark?

 

Cheers,

Darien

 

___________________________________________________________________________
Sent via:    Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx>
Archives:    https://www.wireshark.org/lists/wireshark-dev
Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-dev
             mailto:wireshark-dev-request@xxxxxxxxxxxxx?subject=unsubscribe