[Paul Offord <Paul.Offord@xxxxxxxxxxxx>]

Hi Roland,

I did reply through Gerrit a few weeks ago but I didn't realise that the feedback doesn't automatically get Posted.

Anyway, I've updated all the comments and posted.

Nest regards...Paul

Sent from Samsung Mobile on O2

-------- Original message --------

From: Roland Knall <rknall@xxxxxxxxx>

Date: 25/06/2017 14:45 (GMT+00:00)

To: Developer support list for Wireshark <wireshark-dev@xxxxxxxxxxxxx>

Subject: Re: [Wireshark-dev] git problem

Hi Paul

Please cover the questions directly in the patchset's comments. You can directly reply on a comment in Gerrit, and afterwards simply reply on the patchset itself to get them committed. It makes it easier to keep all the comments in one place and figure out their meaning.

cheers,

Roland

On Sun, Jun 25, 2017 at 3:24 PM, Paul Offord <Paul.Offord@xxxxxxxxxxxx> wrote:

Thanks Pascal and Roland,

 

The instructions below worked.  My local branch is review/unknown/syncro.  Anyway, the new Patch Set is now on Gerrit.

 

Roland,

 

I still have more work to do to cover all of the changes you requested.  I have a couple of questions regarding your comments but I’ll cover those in another email.

 

Best regards…Paul

 

From: Wireshark-dev [mailto:wireshark-dev-bounces@wireshark.org] On Behalf Of Roland Knall
Sent: 25 June 2017 12:26
To: Developer support list for Wireshark <wireshark-dev@xxxxxxxxxxxxx>
Subject: Re: [Wireshark-dev] git problem

 

Hi Paul

 

Please review the following link:

 

https://www.mediawiki.org/wiki/Gerrit/Getting_started

 

It seems especially the last section is your issue. You've to start from an empty master:

 

> git pull

 

then download the original patchiest, if you have not kept a branch with the change:

 

> git review -d 19666

 

After that step, you change the code as you normally would, and finish with

 

> git commit --add --amend

 

At this point you've got a local branch called "review/paul_offord/syncro" and you can upload this with the command

 

> git review 

 

If you follow these steps, you should be able to upload a complete new patchset in the same change, which is the way to go. If you need to rebase to new changes in the master branch, please simple after the "git review -d 19666" step rebase to master with

 

> git rebase master

 

 

Cheers,

Roland

 

On Sun, Jun 25, 2017 at 1:12 PM, Pascal Quantin <pascal.quantin@xxxxxxxxx> wrote:

Hi Paul,

 

 

Le 25 juin 2017 12:59, "Paul Offord" <Paul.Offord@xxxxxxxxxxxx> a écrit :

I am trying to upload some patches to Gerrit.  The start of my commit message looks like this:

 

[WIP] First stage of updates to Syncro

 

This patch set deals with several of the issues raised by

Roland Knall after he checked through the first submission.

This is still a work in progress.

 

Change-Id: I05e96a3efdfed13bf779fecde6677aa9f0a0c12c

 

# Please enter the commit message for your changes. Lines starting

# with '#' will be ignored, and an empty message aborts the commit.

#

# Date:      Sun Jun 25 11:06:29 2017 +0100

#

# On branch syncro

# Changes to be committed:

#       renamed:    plugins/syncro/Makefile.common -> CMakeListsCustom.txt

#       modified:   plugins/syncro/AUTHORS

#       modified:   plugins/syncro/CMakeLists.txt

#       deleted:    plugins/syncro/ChangeLog

#       deleted:    plugins/syncro/INSTALL

#       modified:   plugins/syncro/Makefile.am

 

Whenever I run git review I get:

 

---------------------------------

 

C:\Development\wireshark>git review

You are about to submit multiple commits. This is expected if you are

submitting a commit that is dependent on one or more in-review

commits. Otherwise you should consider squashing your changes into one

commit before submitting.

 

The outstanding commits are:

 

[33m45a9bc4d34[m[33m ([m[1;36mHEAD -> [m[1;32msyncro[m[33m)[m [WIP] First stage of updates to Syncro

[33mc290e9d0ea[m Merge commit 'refs/changes/66/19666/1' of https://code.wireshark.org/review/a/wireshark into syncro

[33m74f8865d67[m Syncro: Program access to plugin_if via TCP

 

Do you really want to submit the above commits?

Type 'yes' to confirm, other to cancel: yes

remote: Processing changes: refs: 1, done

remote: ERROR: missing Change-Id in commit message footer

remote:

remote: Hint: To automatically insert Change-Id, install the hook:

remote:   gitdir=$(git rev-parse --git-dir); scp -p -P 29418 PaulOfford@xxxxxxxxxxxxxxxxxx:hooks/commit-msg ${gitdir}/hooks/

remote: And then amend the commit:

remote:   git commit --amend

remote:

To https://code.wireshark.org/review/wireshark

! [remote rejected]       HEAD -> refs/publish/master/syncro (missing Change-Id in commit message footer)

error: failed to push some refs to 'https://code.wireshark.org/review/wireshark'

 

 

I’ve got the commit-msg hook installed and I’ve tried the git review with and without it – I get the same result.

 

There are three things:

 

• I added the Change-Id to the commit message with no blank line after it, and yet when I save it and run commit amend again a blank line has been inserted.  Why is this?
• Why do I get unprintable characters in the git review output?

 

Because your she'll does not seem to support color output. Nothing to worry about.

 

•  
• Why is the change being rejected? The commit message has the correct Change-Id.

Because you have a merge changeset that does not include and change-id.

You should get it of rid and your new changes should be part of the initial changeset (that you can update with the 'git commit --ammend' command).

 

•  

 

I’m getting pretty frustrated with this and so any help would be much appreciated.

 

Thanks and regards…Paul

______________________________________________________________________

This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system.

Any views or opinions expressed are solely those of the author and do not necessarily represent those of Advance Seven Ltd. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission.

Advance Seven Ltd. Registered in England & Wales numbered 2373877 at Endeavour House, Coopers End Lane, Stansted, Essex CM24 1SJ

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
______________________________________________________________________

___________________________________________________________________________
Sent via:    Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx>
Archives:    https://www.wireshark.org/lists/wireshark-dev
Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-dev
             mailto:wireshark-dev-request@wireshark.org?subject=unsubscribe

 

___________________________________________________________________________
Sent via:    Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx>
Archives:    https://www.wireshark.org/lists/wireshark-dev
Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-dev
             mailto:wireshark-dev-request@wireshark.org?subject=unsubscribe

 

______________________________________________________________________

This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system.

Any views or opinions expressed are solely those of the author and do not necessarily represent those of Advance Seven Ltd. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission.

Advance Seven Ltd. Registered in England & Wales numbered 2373877 at Endeavour House, Coopers End Lane, Stansted, Essex CM24 1SJ

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
______________________________________________________________________

___________________________________________________________________________
Sent via:    Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx>
Archives:    https://www.wireshark.org/lists/wireshark-dev
Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-dev
             mailto:wireshark-dev-request@wireshark.org?subject=unsubscribe

______________________________________________________________________

This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system.

Any views or opinions expressed are solely those of the author and do not necessarily represent those of Advance Seven Ltd. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission.

Advance Seven Ltd. Registered in England & Wales numbered 2373877 at Endeavour House, Coopers End Lane, Stansted, Essex CM24 1SJ

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
______________________________________________________________________