[João Valverde <joao.valverde@xxxxxxxxxxxxxxxxxx>]

I'm not sure what you did to make configure find qtchooser in 
/usr/lib/qtchooser (changed your $PATH?) but this works out of the box 
for me on Fedora 20:

$ whereis qtchooser
qtchooser: /usr/lib/qtchooser

$ ./configure --with-qt=5 --with-gtk=no
---
configure:47210: checking for qtchooser
configure:47243: result: no
configure:47322: checking for lrelease-qt5
configure:47340: found /usr/bin/lrelease-qt5
configure:47352: result: /usr/bin/lrelease-qt5
configure:47372: checking whether lrelease -version works
configure:47382: result: ok, lrelease version 5.4.1
---

$ lrelease-qt5 -version
lrelease version 5.4.1

The "checking whether lrelease -version works" message could be make 
more explicit by using $LRELEASE instead.

On 08/16/2016 05:12 PM, Jonne Zutt wrote:
> Thanks to Jeff's suggestion I was able to install qt5-qttools-devel
> which provided me with lrelease-qt5
> $ dzdo yum whatprovides /usr/bin/lrelease-qt5
> qt5-qttools-devel-5.2.0-0.5.beta1.fc20.i686 : Development files for
> qt5-qttools
>
> "./configure --with-qt=5 --with-gtk=no" now ends with:
> checking for qtchooser... /usr/lib/qtchooser/qtchooser
> checking for uic... /usr/lib/qtchooser/uic
> checking for qtchooser... (cached) /usr/lib/qtchooser/qtchooser
> checking for moc... /usr/lib/qtchooser/moc
> checking for qtchooser... (cached) /usr/lib/qtchooser/qtchooser
> checking for rcc... /usr/lib/qtchooser/rcc
> checking for qtchooser... (cached) /usr/lib/qtchooser/qtchooser
> checking for lrelease... /usr/lib/qtchooser/lrelease
> checking whether lrelease -version works... no
> configure: error: /usr/lib/qtchooser/lrelease -qt=5 -version returned
> non-zero exit status
> make: *** No targets specified and no makefile found.  Stop.
>
>
> Ok, so configure fails when trying "lrelease -qt=5 -version", it seems
> my lrelease doesn't like the -qt=5 argument.
>
> $ lrelease -qt=4 -version
> lrelease: could not find a Qt installation of '4'
> $ lrelease -qt=5 -version
> lrelease: could not find a Qt installation of '5'
> $ lrelease -qt=default -version
> lrelease version 4.8.6
>
> It seems to like -qt=qt5 though:
>
> $ /usr/lib/qtchooser/lrelease -qt=qt5 -version
> lrelease version 5.3.2
>
> I changed:
>                 LRELEASE="$LRELEASE -qt=$qt_version"
> into
>                 LRELEASE="$LRELEASE -qt=qt$qt_version"
>
>
> Then configure seems to work:
> checking for qtchooser... /usr/lib/qtchooser/qtchooser
> checking for uic... /usr/lib/qtchooser/uic
> checking for qtchooser... (cached) /usr/lib/qtchooser/qtchooser
> checking for moc... /usr/lib/qtchooser/moc
> checking for qtchooser... (cached) /usr/lib/qtchooser/qtchooser
> checking for rcc... /usr/lib/qtchooser/rcc
> checking for qtchooser... (cached) /usr/lib/qtchooser/qtchooser
> checking for lrelease... /usr/lib/qtchooser/lrelease
> checking whether lrelease -version works... ok, lrelease version 5.3.2
>
>
> It seems I need to do the same for UIC:
>
>   UIC      ui_about_dialog.h
> uic: could not find a Qt installation of '5'
>
>                 UIC="$UIC -qt=qt$qt_version"
>
> And also for MOC, RCC.
>
> Maybe I should've changed qt_version, but anyways, I do not see a neat
> way for that (e.g., cannot provide --with-qt=qt5 to configure).
>
> Seems like I'm almost there, getting to closer to build an rpm:
>
> Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.P9teqs
> + umask 022
> + cd /export/home/jonne/wireshark/wireshark/packaging/rpm/BUILD
> + cd /export/home/jonne/wireshark/wireshark/packaging/rpm/BUILD
> + rm -rf wireshark-2.3.0
> + /usr/bin/tar -xf -
> + /usr/bin/xz -dc
> /export/home/jonne/wireshark/wireshark/packaging/rpm/SOURCES/wireshark-2.3.0.tar.xz
> /usr/bin/tar: This does not look like a tar archive
> /usr/bin/tar: Exiting with failure status due to previous errors
> error: Bad exit status from /var/tmp/rpm-tmp.P9teqs (%prep)
>
>
> RPM build errors:
>     Bad exit status from /var/tmp/rpm-tmp.P9teqs (%prep)
>
>
> Thanks for you help,
> Jonne.
>
>
>
> $ qtchooser -qt=5 -version
> qtchooser: unknown option: -version
> $ qtchooser -qt=5
> Usage:
>   qtchooser { -l | -list-versions | -print-env }
>   qtchooser -run-tool=<tool name> [-qt=<Qt version>] [program arguments]
>   <executable name> [-qt=<Qt version>] [program arguments]
>
> Environment variables accepted:
>  QTCHOOSER_RUNTOOL  name of the tool to be run (same as the -run-tool
> argument)
>  QT_SELECT          version of Qt to be run (same as the -qt argument)
>
> $ qtchooser -qt=5 -l
> default
> qt4-64
> qt4
> qt5-64
> qt5
>
> On Tue, Aug 16, 2016 at 4:14 PM, Jo�o Valverde
> <joao.valverde@xxxxxxxxxxxxxxxxxx
> <mailto:joao.valverde@xxxxxxxxxxxxxxxxxx>> wrote:
>
>     I wasn't aware of that shell script, it might need updating.
>
>     This part of the Qt toolchain (qt-tools) is awkward, to be kind, and
>     detection might not work always well.
>
>     Feel free to ask for help here if you get stuck.
>
>     You need lrelease to build the Qt GUI. Not sure what is going on
>     with qtchooser.
>
>
>
>     On 08/16/2016 02:41 PM, Jonne Zutt wrote:
>
>         I see, thanks for that. I was already trying this path after
>         reading the
>         reply of Anders.
>
>         I installed the rpms that were suggested
>         by wireshark/tools/install_rpms_for_devel.sh
>
>         I then also installed qtchooser-39-1.fc20.x86_64, but configure
>         is still
>         unable to find it somehow. I guess I need to help it a bit
>         somehow, I'll
>         keep trying!
>
>         Thanks,
>         Jonne.
>
>
>         ....
>         checking for GLIB... yes
>         checking for Qt5Core - version >= 5.0.0... yes (version 5.3.2)
>         checking for Qt5Gui - version >= 5.0.0... yes (version 5.3.2)
>         checking for Qt5Widgets - version >= 5.0.0... yes (version 5.3.2)
>         checking for Qt5PrintSupport - version >= 5.0.0... yes (version
>         5.3.2)
>         checking for Qt5Multimedia - version >= 5.0.0... yes (version 5.3.2)
>         checking for Qt5MacExtras - version >= 5.0.0... no
>         checking whether Qt works without -fPIC... no
>         checking whether Qt works with -fPIC... yes
>         checking for qtchooser... no
>         checking for uic-qt5... /usr/bin/uic-qt5
>         checking for qtchooser... no
>         checking for moc-qt5... /usr/bin/moc-qt5
>         checking for qtchooser... no
>         checking for rcc-qt5... /usr/bin/rcc-qt5
>         checking for qtchooser... no
>         checking for lrelease-qt5... no
>         checking for lrelease... no
>         configure: error: I couldn't find lrelease-qt5 or lrelease; make
>         sure
>         it's installed and in your path
>         make: *** No targets specified and no makefile found.  Stop.
>
>
>         On Tue, Aug 16, 2016 at 1:57 PM, Jo�o Valverde
>         <joao.valverde@xxxxxxxxxxxxxxxxxx
>         <mailto:joao.valverde@xxxxxxxxxxxxxxxxxx>
>         <mailto:joao.valverde@xxxxxxxxxxxxxxxxxx
>         <mailto:joao.valverde@xxxxxxxxxxxxxxxxxx>>> wrote:
>
>
>
>             On 08/16/2016 10:23 AM, Jonne Zutt wrote:
>
>                 Hi all,
>
>                 Could somebody tell me what I have to do to be able to
>         build an
>                 RPM package?
>
>
>             You have to use autotools. :-)
>
>             CMake doesn't support building an rpm package yet (see
>         README.cmake).
>
>                 I successfully build wireshark using cmake and make.
>                 I have a working wireshark-gtk executable in the build
>         directory
>                 that I
>                 can run and works fine.
>
>                 Now, if I try to run "make rpm-package", it seems it doesn't
>                 know the
>                 target. I wonder what I have to do to get this?
>
>                 $ make rpm-package
>                 make: *** No rule to make target `rpm-package'.  Stop.
>
>                 Thanks,
>                 Jonne.
>
>
>
>
>         ___________________________________________________________________________
>                 Sent via:    Wireshark-dev mailing list
>                 <wireshark-dev@xxxxxxxxxxxxx
>         <mailto:wireshark-dev@xxxxxxxxxxxxx>
>         <mailto:wireshark-dev@xxxxxxxxxxxxx
>         <mailto:wireshark-dev@xxxxxxxxxxxxx>>>
>                 Archives:
>         https://www.wireshark.org/lists/wireshark-dev
>         <https://www.wireshark.org/lists/wireshark-dev>
>                 <https://www.wireshark.org/lists/wireshark-dev
>         <https://www.wireshark.org/lists/wireshark-dev>>
>                 Unsubscribe:
>         https://wireshark.org/mailman/options/wireshark-dev
>         <https://wireshark.org/mailman/options/wireshark-dev>
>                 <https://wireshark.org/mailman/options/wireshark-dev
>         <https://wireshark.org/mailman/options/wireshark-dev>>
>                              mailto:wireshark-dev-request@xxxxxxxxxxxxx
>         <mailto:wireshark-dev-request@xxxxxxxxxxxxx>
>                 <mailto:wireshark-dev-request@xxxxxxxxxxxxx
>         <mailto:wireshark-dev-request@xxxxxxxxxxxxx>>?subject=unsubscribe
>
>
>         ___________________________________________________________________________
>             Sent via:    Wireshark-dev mailing list
>         <wireshark-dev@xxxxxxxxxxxxx <mailto:wireshark-dev@xxxxxxxxxxxxx>
>             <mailto:wireshark-dev@xxxxxxxxxxxxx
>         <mailto:wireshark-dev@xxxxxxxxxxxxx>>>
>             Archives:    https://www.wireshark.org/lists/wireshark-dev
>         <https://www.wireshark.org/lists/wireshark-dev>
>             <https://www.wireshark.org/lists/wireshark-dev
>         <https://www.wireshark.org/lists/wireshark-dev>>
>             Unsubscribe:
>         https://wireshark.org/mailman/options/wireshark-dev
>         <https://wireshark.org/mailman/options/wireshark-dev>
>             <https://wireshark.org/mailman/options/wireshark-dev
>         <https://wireshark.org/mailman/options/wireshark-dev>>
>                         mailto:wireshark-dev-request@xxxxxxxxxxxxx
>         <mailto:wireshark-dev-request@xxxxxxxxxxxxx>
>             <mailto:wireshark-dev-request@xxxxxxxxxxxxx
>         <mailto:wireshark-dev-request@xxxxxxxxxxxxx>>?subject=unsubscribe
>
>
>
>
>         ___________________________________________________________________________
>         Sent via:    Wireshark-dev mailing list
>         <wireshark-dev@xxxxxxxxxxxxx <mailto:wireshark-dev@xxxxxxxxxxxxx>>
>         Archives:    https://www.wireshark.org/lists/wireshark-dev
>         <https://www.wireshark.org/lists/wireshark-dev>
>         Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
>         <https://wireshark.org/mailman/options/wireshark-dev>
>                      mailto:wireshark-dev-request@xxxxxxxxxxxxx
>         <mailto:wireshark-dev-request@xxxxxxxxxxxxx>?subject=unsubscribe
>
>     ___________________________________________________________________________
>     Sent via:    Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx
>     <mailto:wireshark-dev@xxxxxxxxxxxxx>>
>     Archives:    https://www.wireshark.org/lists/wireshark-dev
>     <https://www.wireshark.org/lists/wireshark-dev>
>     Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
>     <https://wireshark.org/mailman/options/wireshark-dev>
>                 mailto:wireshark-dev-request@xxxxxxxxxxxxx
>     <mailto:wireshark-dev-request@xxxxxxxxxxxxx>?subject=unsubscribe
>
>
>
>
> ___________________________________________________________________________
> Sent via:    Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx>
> Archives:    https://www.wireshark.org/lists/wireshark-dev
> Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
>              mailto:wireshark-dev-request@xxxxxxxxxxxxx?subject=unsubscribe