[Jonne Zutt <jonne.zutt.ml@xxxxxxxxx>]

The "File listed twice" is a known issue I've read, and only a warning.

For the Installed (but unpackaged) file, I've added the following to the %files sections of the rpm spec:

%exclude %{_libdir}/pkgconfig

Hurray!

Package successfully built in /export/home/jzutt/wireshark/wireshark/packaging/rpm/RPMS.

 38M -rw-rw-r-- 1 jonne jonne  38M Aug 17 04:34 packaging/rpm/RPMS/x86_64/wireshark-2.3.0-1.x86_64.rpm

3.4M -rw-rw-r-- 1 jonne jonne 3.4M Aug 17 04:34 packaging/rpm/RPMS/x86_64/wireshark-qt-2.3.0-1.x86_64.rpm

I will test these rpms tomorrow. I wonder if there is anything I can do to help improve wireshark related to this mail thread, or is my distribution/system considered old or unsupported? Or maybe I've given sufficient details for others?

Thanks very much for helping me, and let me know if there's more I can do,

Jonne.

On Wed, Aug 17, 2016 at 11:03 AM, Jonne Zutt <jonne.zutt.ml@xxxxxxxxx> wrote:

id -u and id -g return numbers greater than am_max_uid=2097151 # 2^21 - 1 and am_max_gid (same number), and therefore, _am_tools gets set to none, which results in am__tar set to false ...

I commented out the "_am_tools=none" lines in the configure script. It decided to use pax then:

checking whether UID '868232633' is supported by ustar format... no

checking whether GID '868232633' is supported by ustar format... no

checking how to create a ustar tar archive... (_am_tools = gnutar plaintar pax cpio none) pax

It takes much longer to create the wireshark-2.3.0.tar.xz now :)

A lot more happened when running "make rpm-package" this time.

It looks pretty good actually, executables are also in packaging/rpm/BUILDROOT subfolders.

But, some more work to do, as the rpm is not yet created:

RPM build errors:

    File listed twice: /usr/local/bin/dumpcap

    Installed (but unpackaged) file(s) found:

   /usr/local/lib64/pkgconfig/wireshark.pc

On Wed, Aug 17, 2016 at 10:41 AM, Jonne Zutt <jonne.zutt.ml@xxxxxxxxx> wrote:

Currently looking into this:

 $ egrep "am__.*tar =" Makefile

am__tar = false

am__untar = false

On Wed, Aug 17, 2016 at 10:34 AM, Jonne Zutt <jonne.zutt.ml@xxxxxxxxx> wrote:

After a "make" or "make all", I do not have the tar ball, also not in my top-level build directory.

Also not after a "make rpm-package".

My packaging/rpm folder, including sub-folders, is quite empty except for a few Makefiles and wireshark.spec and wireshark.spec.in.

"make dist" does create the archive in my top-level build directory, but it doesn't look good (empty):

$ ls -lsh wireshark-2.3.0.tar.xz

4.0K -rw-rw-r-- 1 jonne jonne 32 Aug 17 02:33 wireshark-2.3.0.tar.xz

Running "make rpm-package" also removes the wireshark-2.3.0.tar.xz in my top-level build directory, so that's why I perhaps do not see it after a "make" or "make all" too, it might get created and deleted later.

The executables are in a .libs folder in my top-level build directory:

$ ls .libs

capinfos  dftest     dumpcap  lt-wireshark  randpkt   rawsharkS.o  text2pcap  tsharkS.o  wiresharkS.o

captype   dftestS.o  editcap  mergecap      rawshark  reordercap   tshark     wireshark

And for each or most of them there's also a script in the top-level build directory:

$ file wireshark tshark mergecap

wireshark: POSIX shell script, ASCII text executable, with very long lines

tshark:    POSIX shell script, ASCII text executable, with very long lines

mergecap:  POSIX shell script, ASCII text executable, with very long lines

This is the first part of logging of "make dist":

$ make dist

make  dist-xz am__post_remove_distdir='@:'

make[1]: Entering directory `/home/jonne/wireshark/wireshark'

if test -d "wireshark-2.3.0"; then find "wireshark-2.3.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "wireshark-2.3.0" || { sleep 5 && rm -rf "wireshark-2.3.0"; }; else :; fi

test -d "wireshark-2.3.0" || mkdir "wireshark-2.3.0"

 (cd capchild && make  top_distdir=../wireshark-2.3.0 distdir=../wireshark-2.3.0/capchild \

     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)

make[2]: Entering directory `/home/jonne/wireshark/wireshark/capchild'

make[2]: Leaving directory `/home/jonne/wireshark/wireshark/capchild'

 (cd caputils && make  top_distdir=../wireshark-2.3.0 distdir=../wireshark-2.3.0/caputils \

     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)

make[2]: Entering directory `/home/jonne/wireshark/wireshark/caputils'

make[2]: Leaving directory `/home/jonne/wireshark/wireshark/caputils'

 (cd codecs && make  top_distdir=../wireshark-2.3.0 distdir=../wireshark-2.3.0/codecs \

     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)

Not much seems to happen there, and also not afterwards.

At the end of "make dist", I see:

make[2]: Entering directory `/home/jonne/wireshark/wireshark/wsutil'

make[2]: Leaving directory `/home/jonne/wireshark/wireshark/wsutil'

 (cd extcap && make  top_distdir=../wireshark-2.3.0 distdir=../wireshark-2.3.0/extcap \

     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)

make[2]: Entering directory `/home/jonne/wireshark/wireshark/extcap'

make[2]: Leaving directory `/home/jonne/wireshark/wireshark/extcap'

 (cd docbook && make  top_distdir=../wireshark-2.3.0 distdir=../wireshark-2.3.0/docbook \

     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)

make[2]: Entering directory `/home/jonne/wireshark/wireshark/docbook'

make[2]: Leaving directory `/home/jonne/wireshark/wireshark/docbook'

test -n "" \

|| find "wireshark-2.3.0" -type d ! -perm -755 \

        -exec chmod u+rwx,go+rx {} \; -o \

  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \

  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \

  ! -type d ! -perm -444 -exec /bin/sh /export/home/jonne/wireshark/wireshark/install-sh -c -m a+r {} {} \; \

|| chmod -R a+r "wireshark-2.3.0"

tardir=wireshark-2.3.0 && false | XZ_OPT=${XZ_OPT--e} xz -c >wireshark-2.3.0.tar.xz

make[1]: Leaving directory `/home/jonne/wireshark/wireshark'

if test -d "wireshark-2.3.0"; then find "wireshark-2.3.0" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "wireshark-2.3.0" || { sleep 5 && rm -rf "wireshark-2.3.0"; }; else :; fi

The script at the end removes the wireshark-2.3.0 folder again, and leaves me with an empty tar.xz.

I don't see <top-level>/.libs referenced anywhere.

I disabled the removal of this wireshark-2.3.0 folder. There's a lot of files in there. It has a total size of 226M. It doesn't contain executables like wireshark, mergecap, tshark though.

How is the above xz command supposed to know what it should compress?

I guess that does not look good. Should that not be part of the previous find command?

Jonne.

On Wed, Aug 17, 2016 at 12:25 AM, Jeff Morriss <jeff.morriss.ws@xxxxxxxxx> wrote:

On Tue, Aug 16, 2016 at 2:46 PM, Jonne Zutt <jonne.zutt.ml@xxxxxxxxx> wrote:

I don't seem to have any /path/to/wireshark-2.3.0.tar.xz anywhere.

Should make dist create that?

For completeness: yes, the "make dist" step (the first step of "make rpm-package") should have created the source tarball in the top-level directory of your build directory.  One of the subsequent steps should symlink that into your SOURCES directory.

Do you not have the source tarball even in your top-level build directory?

___________________________________________________________________________
Sent via:    Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx>
Archives:    https://www.wireshark.org/lists/wireshark-dev
Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
             mailto:wireshark-dev-request@wireshark.org?subject=unsubscribe