[Dario Lombardo <dario.lombardo.ml@xxxxxxxxx>]

To push using ssh (that is one of the two methods supported) you have to upload your public key to gerrit using the web interface. Next to the http section, you can find the ssh one. Use it to upload the key. 

You can push using http and its password. Simply replace the ssh url with the https one.

On Tue, Apr 19, 2016 at 1:02 PM, Yang Luo <hsluoyb@xxxxxxxxx> wrote:

Hi Dario,

I got this error.

J:\github_repos\wireshark>git push ssh://yangluo@xxxxxxxxxxxxxxxxxx:29418/wireshark HEAD:refs/for/master/dot11-support-on-windows

Permission denied (publickey).

fatal: Could not read from remote repository.

Please make sure you have the correct access rights

and the repository exists.

On Tue, Apr 19, 2016 at 6:35 PM, Dario Lombardo <dario.lombardo.ml@xxxxxxxxx> wrote:

Hi Yang
You can clone from github, then add whatever git remote you want. But you don't need to do that, since the command to push a change to gerrit can be issued to point directly to wireshark repo. As stated here https://www.wireshark.org/docs/wsdg_html_chunked/ChSrcContribute.html you can push to 

git push ssh://my.username@xxxxxxxxxxxxxxxxxx:29418/wireshark HEAD:refs/for/master/snowcone-machine

so

git clone <github>
[changes]
git push ssh://my.username@xxxxxxxxxxxxxxxxxx:29418/wireshark HEAD:refs/for/master/snowcone-machine

OR

git clone <github>

git add remote wsrepo ssh://my.username@xxxxxxxxxxxxxxxxxx:29418/wireshark

[changes]

git push wsrepo HEAD:refs/for/master/snowcone-machine

Be careful to check that the github repo is aligned to master as you expect.

But if you're experiencing problems downloading from wireshark, it is very likely that you will have issues uploading to it.

Dario.

On Tue, Apr 19, 2016 at 10:45 AM, Yang Luo <hsluoyb@xxxxxxxxx> wrote:

Hi list,

I want to submit a patch to Wireshark. I'm using SmartGit on Win10. My location is Beijing. I followed the guide here: https://wiki.wireshark.org/Development/SubmittingPatches

And I always fails this step:

git clone ssh://yangluo@xxxxxxxxxxxxxxxxxx:29418/wireshark

Because the speed is 20KB/s to 40KB/s, and and downloading a half more or less the connection usually fails.

I can download the code from GitHub:

git clone https://github.com/wireshark/wireshark

it's speed is 200KB/s +.

I want to know if there a way to make Wireshark's GitHub repo able to commit to gerrit, or change the GitHub repo into the Gerrit recognized repo, or download the repo in a "continue transferring from breakpoint" way?

Cheers,

Yang

___________________________________________________________________________
Sent via:    Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx>
Archives:    https://www.wireshark.org/lists/wireshark-dev
Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
             mailto:wireshark-dev-request@xxxxxxxxxxxxx?subject=unsubscribe

___________________________________________________________________________
Sent via:    Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx>
Archives:    https://www.wireshark.org/lists/wireshark-dev
Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
             mailto:wireshark-dev-request@xxxxxxxxxxxxx?subject=unsubscribe

___________________________________________________________________________
Sent via:    Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx>
Archives:    https://www.wireshark.org/lists/wireshark-dev
Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
             mailto:wireshark-dev-request@xxxxxxxxxxxxx?subject=unsubscribe