[Yang Luo <hsluoyb@xxxxxxxxx>]

Hi Graham,

This way works! Thanks!

Cheers,

Yang

On Tue, Apr 12, 2016 at 4:30 PM, Graham Bloice <graham.bloice@xxxxxxxxxxxxx> wrote:

On 12 April 2016 at 06:53, Yang Luo <hsluoyb@xxxxxxxxx> wrote:

Hi list,

I have enabled 802.11 control and management frames capture on Windows using Npcap. I found that the Beacon frames are marked as "Malformed Packet" by Wireshark 2.0.2.

The false trace of the No. 40 packet is here:

(BTW, is there any simple copy text method for a packet in Wireshark, like copying all the protocol tree in text like below? I manually copied all the fields and it's slow)

Select a packet (or mark if more than one) the packets of interest, expand the details you require in the packet details pane, then use File -> Export Packet Dissections -> As Plain Text..., in the Export dialog there are options to choose which packets to export and how to format the output.

IEEE 802.11 wireless LAN management frame

  Tagged parameters (213 bytes)

    Tag: Channel Usage

      Tag length: 175

        Expert Info (Error/Malformed): Tag Length is longer than remaining payload

          Tag Length is longer than remaining payload

          Severity level: Error

          Group: Malformed

The capture file with the error is:

https://github.com/nmap/npcap/releases/download/v0.06-r15/npcap_beacon_error.pcapng.gz

You can test this feature using this release:

https://github.com/nmap/npcap/releases

I'm not an expert of 802.11 protocols, so can anyone point out what's wrong here? Thanks!

--------------------------------------------------------

At last I paste the usage of this release here:

Usage:

1. Install npcap-nmap-0.06-r15-wifi.exe.
2. Run WlanHelper.exe with Administrator privilege. Type in the index of your wireless adapter (usually 0) and press Enter. Then type in 1 and press Enter to to switch on the Monitor Mode.
3. Launch Wireshark and capture on the wireless adapter, you will see all 802.11 packets (data + control + management).
4. If you need to return to Managed Mode, run WlanHelper.exe again and input the index of the adapter, then type in 0 and press Enter to to switch off the *Monitor Mode.

Notice:

You need to use WlanHelper.exe tool to switch on the Monitor Mode in order to see 802.11 control and management packets in Wireshark (also encrypted 802.11 data packets, you need to specify thedecipher key in Wireshark in order to decrypt those packets), otherwise you will only see 802.11 data packets.

Switching on the Monitor Mode will disconnect your wireless network from the AP, you can switch back to Managed Mode (aka ExtSTA in Microsoft's terminologies) using the same WlanHelper.exe tool.

Cheers,

Yang

--

Graham Bloice

___________________________________________________________________________
Sent via:    Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx>
Archives:    https://www.wireshark.org/lists/wireshark-dev
Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
             mailto:wireshark-dev-request@xxxxxxxxxxxxx?subject=unsubscribe