[Evan Huus <eapache@xxxxxxxxx>]

Specifically, see the byte_swapped boolean in wiretap/libpcap.c and
wiretap/pcapng.c

On Fri, Jan 10, 2014 at 9:06 AM, Evan Huus <eapache@xxxxxxxxx> wrote:
> Wireshark definitely reads and stores the byte-order from the pcap header when opening the file. I don't think that is exposed currently, but it should be relatively easy to do (from wiretap).
>
>> On Jan 10, 2014, at 7:33 AM, Michal Labedzki <michal.labedzki@xxxxxxxxx> wrote:
>>
>> Hello,
>>
>> Is there option to dissector know byte order of... "interface"? I am
>> thinking about:
>> 1) PCAP File
>> 2) PCAPNG file
>> 3) live capturing
>>
>> Please look at packet-usb.c.
>> There is:
>> -----------------------
>> /* Adds the Linux USB pseudo header fields to the tree.
>> * NOTE: The multi-byte fields in this header, and the pseudo-header
>> *       extension, are in host-endian format so we can't
>> *       use proto_tree_add_item() nor the tvb_get_xyz() routines and is
>> *       the reason for the tvb_memcpy() and proto_tree_add_uint[64]()
>> *       pairs below. */
>> static void
>> dissect_linux_usb_pseudo_header(tvbuff_t *tvb, packet_info *pinfo,
>> proto_tree *tree,
>>        guint *bus_id, guint *device_address)
>> {
>> ...
>>    tvb_memcpy(tvb, (guint8 *)&val64, 0, 8);
>>    proto_tree_add_uint64(tree, hf_usb_urb_id, tvb, 0, 8, val64);
>> ...
>> }
>> -----------------------
>>
>> And: http://www.tcpdump.org/linktypes.html
>> -----------------------
>> LINKTYPE_USB_LINUX_MMAPPED 220 DLT_USB_LINUX_MMAPPED
>> USB packets, beginning with a Linux USB header, as specified by the
>> struct usbmon_packet in the Documentation/usb/usbmon.txt file in the
>> Linux source tree. All 64 bytes of the header are present. All fields
>> in the header are in the host byte order for the pcap file, as
>> specified by the file's magic number, or for the section of the
>> pcap-ng file, as specified by the Section Header Block. For
>> isochronous transfers, the ndesc field specifies the number of
>> isochronous descriptors that follow.
>> -----------------------
>>
>>> "All fields in the header are in the host byte order for the pcap file"
>>
>> This USB header is in host order of capture's program. So when you
>> capturing on Big-endian machine and open capture file on Little-endian
>> machine this USB code should fail.
>>
>> Probably PCAP/PCAPNG have ordering info by magic bytes, but I do not
>> know how to do that while live capturing (current code work for this
>> case)
>>
>> Possible solutions:
>> 1. Wireshark already support byte-ordering information for dissectors
>> (anyone seen, anyone knows?)
>>
>> 2. Drop LINKTYPE_USB*s (LINKTYPE_NULL?) and request for replacement
>> with specified byte order (network order?) - this does not solve
>> backward compatibility with already existing captures...
>>
>> 3. Wireshark already use magic and bytes are all the time in right
>> order (host order)
>>
>>
>> --
>>
>> Pozdrawiam / Best regards
>> -------------------------------------------------------------------------------------------------------------
>> Michał Łabędzki, Software Engineer
>> Tieto Corporation
>>
>> Product Development Services
>>
>> http://www.tieto.com / http://www.tieto.pl
>> ---
>> ASCII: Michal Labedzki
>> location: Swobodna 1 Street, 50-088 Wrocław, Poland
>> room: 5.01 (desk next to 5.08)
>> ---
>> Please note: The information contained in this message may be legally
>> privileged and confidential and protected from disclosure. If the
>> reader of this message is not the intended recipient, you are hereby
>> notified that any unauthorised use, distribution or copying of this
>> communication is strictly prohibited. If you have received this
>> communication in error, please notify us immediately by replying to
>> the message and deleting it from your computer. Thank You.
>> ---
>> Please consider the environment before printing this e-mail.
>> ---
>> Tieto Poland spółka z ograniczoną odpowiedzialnością z siedzibą w
>> Szczecinie, ul. Malczewskiego 26. Zarejestrowana w Sądzie Rejonowym
>> Szczecin-Centrum w Szczecinie, XIII Wydział Gospodarczy Krajowego
>> Rejestru Sądowego pod numerem 0000124858. NIP: 8542085557. REGON:
>> 812023656. Kapitał zakładowy: 4 271500 PLN
>> ___________________________________________________________________________
>> Sent via:    Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx>
>> Archives:    http://www.wireshark.org/lists/wireshark-dev
>> Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
>>             mailto:wireshark-dev-request@xxxxxxxxxxxxx?subject=unsubscribe