Wireshark · Wireshark-dev: Re: [Wireshark-dev] The field called Command Sequence Number in the SMB2 dissector is actually the M

Wireshark-dev: Re: [Wireshark-dev] The field called Command Sequence Number in the SMB2 dissect

From: Dirk Jagdmann <doj@xxxxxxxxx>

Date: Thu, 01 Aug 2013 10:57:54 -0700

> I took a half-educated whack at fixing those in r51080.  Thanks for pointing it
> out (and feel free to point out any mistakes I may have made).

It all looks reasonable, thenk you for making those changes.

-- 
---> Dirk Jagdmann
----> http://cubic.org/~doj
-----> http://llg.cubic.org

References:
- Re: [Wireshark-dev] The field called Command Sequence Number in the SMB2 dissector is actually the Message ID
  - From: Jeff Morriss

Prev by Date: Re: [Wireshark-dev] The field called Command Sequence Number in the SMB2 dissector is actually the Message ID
Next by Date: [Wireshark-dev] Rev 51084 causes the 32-bit x86 OS X build to fail, as it has an older version of GLib
Previous by thread: Re: [Wireshark-dev] The field called Command Sequence Number in the SMB2 dissector is actually the Message ID
Next by thread: [Wireshark-dev] Rev 51084 causes the 32-bit x86 OS X build to fail, as it has an older version of GLib
Index(es):
- Date
- Thread