["RUOFF LARS" <Lars.Ruoff@xxxxxxxxxxxxxxxxx>]

Yes, that helped. Thanks Mike.

I guess i mixed things up between building from command line and via the
provided VC++ workspace.
That is an excellent idea by the way.
(but i would have prefered that the default build command would have
been "nmake -f Makefile.nmake" instead of "nmake -f Makefile.nmake setup
all", which erases all the libs and  starts downloading them all over
again. :-/ )

Lars

> -----Original Message-----
> From: wireshark-dev-bounces@xxxxxxxxxxxxx 
> [mailto:wireshark-dev-bounces@xxxxxxxxxxxxx] On Behalf Of 
> Speck Michael EHWG AVL/GAE
> Sent: mercredi 14 octobre 2009 13:15
> To: Developer support list for Wireshark
> Subject: Re: [Wireshark-dev] Current trunk crashes on Windows?
> 
> Hi Lars,
> 
> some weeks ago I had the same problem that Wireshark crashes 
> at the same position as you described.
> For me it helped to run "make distclean" and compile 
> everything from scratch again.
> 
> 
> Cheers
> Mike
> 
> 
>  
> 
> -----Original Message-----
> From: wireshark-dev-bounces@xxxxxxxxxxxxx
> [mailto:wireshark-dev-bounces@xxxxxxxxxxxxx] On Behalf Of RUOFF LARS
> Sent: Mittwoch, 14. Oktober 2009 10:13
> To: Developer support list for Wireshark
> Subject: [Wireshark-dev] Current trunk crashes on Windows?
> 
> Hi,
> The current trunk (rev.30555) crashes on Windows when loading 
> the Prefs
> file:
> 
> Unhandled exception at 0x77c478ac in wireshark.exe: 
> 0xC0000005: Access violation reading location 0x00000001.
> 
> Call Stack:
>  	msvcrt.dll!77c478ac() 	
>  	[Frames below may be incorrect and/or missing, no symbols loaded
> for msvcrt.dll]	
>  	msvcrt.dll!77c2c2e3() 	
> >	wireshark.exe!font_init()  Line 407 + 0xe bytes	C
>  	wireshark.exe!main(int argc=0, char * * argv=0x02ef5eac)  Line
> 2546	C
>  	wireshark.exe!WinMain(HINSTANCE__ * 
> hInstance=0x00400000, HINSTANCE__ * hPrevInstance=0x00000000, 
> char * lpszCmdLine=0x00151f28,
> int nCmdShow=1)  Line 2806 + 0x17 bytes	C
>  	wireshark.exe!__tmainCRTStartup()  Line 578 + 0x1d bytes C
>  	kernel32.dll!7c816fe7() 	
> 
> Is it just me?
> Is it a known issue?
> 1.3.0 runs fine when i compile from source.
> 
> Lars
> 
> For info:
> > wireshark.exe -v
> wireshark 1.3.1
> 
> Copyright 1998-2009 Gerald Combs <gerald@xxxxxxxxxxxxx> and 
> contributors.
> This is free software; see the source for copying conditions. 
> There is NO warranty; not even for MERCHANTABILITY or FITNESS 
> FOR A PARTICULAR PURPOSE.
> 
> Compiled with GTK+ 2.16.6, with GLib 2.20.5, with WinPcap 
> (version unknown), with libz 1.2.3, without POSIX 
> capabilities, with libpcre 7.0, with SMI 0.4.8, with c-ares 
> 1.6.0, with Lua 5.1, without Python, with GnuTLS 2.8.1, with 
> Gcrypt 1.4.4, with MIT Kerberos, with GeoIP, with PortAudio 
> V19-devel (built Sep 23 2009), with AirPcap, with new_packet_list.
> 
> Running on Windows XP Service Pack 2, build 2600, with WinPcap version
> 4.0.2
> (packet.dll version 4.0.0.1040), based on libpcap version 
> 0.9.5, GnuTLS 2.8.1, Gcrypt 1.4.4, without AirPcap.
> 
> Built using Microsoft Visual C++ 9.0 build 30729 
> ______________________________________________________________
> __________
> ___
> Sent via:    Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx>
> Archives:    http://www.wireshark.org/lists/wireshark-dev
> Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
>  
> mailto:wireshark-dev-request@xxxxxxxxxxxxx?subject=unsubscribe
> ______________________________________________________________
> _____________
> Sent via:    Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx>
> Archives:    http://www.wireshark.org/lists/wireshark-dev
> Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
>              
> mailto:wireshark-dev-request@xxxxxxxxxxxxx?subject=unsubscribe
>