[Munish Dayal <munish.dayal@xxxxxxxxxxx>]

Hi,

Is this dissector code for "RTP multiplexed streams" submitted to Wireshark ?
What is the bug number ?

Thanks,
Munish

-----Original Message-----

Message: 5
Date: Fri, 28 Aug 2009 18:20:28 +0100
From: "Neil Piercy" <Neil.Piercy@xxxxxxxxxxxx>
Subject: Re: [Wireshark-dev] Need help in Decoding RTP Multiplex
        streams inWireshark
To: "Developer support list for Wireshark"
        <wireshark-dev@xxxxxxxxxxxxx>
Message-ID:
        <CEDCBB894168244E9C8BD430E1E9F1AB037156A2@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
Content-Type: text/plain; charset="us-ascii"

Hi,

ip.access have developed a basic dissector for this protocol which we
will happily add to the project - I'll raise a bug report and attach the
file.

At present it only handles the uncompressed RTP header case, but should
provide a starting point for further development.

BTW we have called the protocol nb_rtpmux, as the 29.414 spec is
originally for the Nb interface.

Regards,
Neil


=================================================
ip.access ltd                   Tel: 01954 713715
Building 2020,                  Fax: 01954 713799
Cambourne Business Park,
Cambourne,
Cambridge, CB23 6DW, UK
Company Registered Number    3400157
Visit the website at http://www.ipaccess.com <http://www.ipaccess.com/>
=================================================





________________________________

        From: wireshark-dev-bounces@xxxxxxxxxxxxx
[mailto:wireshark-dev-bounces@xxxxxxxxxxxxx] On Behalf Of shruti singh
        Sent: 27 August 2009 12:36
        To: Developer support list for Wireshark
        Subject: Re: [Wireshark-dev] Need help in Decoding RTP Multiplex
streams inWireshark


        Hi,

        Yes RTP multiplexing is in compliance to 3GPP TS 29.414 Release
7 specification

        thanks
        Shruti


        On Wed, Aug 26, 2009 at 7:58 PM, Jaap Keuter
<jaap.keuter@xxxxxxxxx> wrote:


                Hi,

                Is there an RFC on that? Are there sample captures to
work with? This always helpsin development.

                Thanx,
                Jaap

                Now competing at http://www.ec2009.info

                On 26 aug 2009, at 07:36, shruti singh
<shruti.is.singh@xxxxxxxxx> wrote:



                        Hi

                        I need to decode RTP Multiplex streams using
wireshark. Presently we can decode only Non -Multiplexed RTP streams in
wireshark.


                        A multiplexed voice packet is composed by
concatenating RTP encapsulated voice packets and IP and UDP headers.

                         Below is the Multiplex Packet format



IP

UDP

Multiplex Header

Compressed RTP Header

RTP Payload

Multiplex Header

Compressed RTP Header

RTP Payload



                        This Multiplex header is repeated in beginning
of each RTP packet. So I was thinking of way to extract this multiplex
header & use it to decode each RTP packet following this Multiplex
header.

                        I supose we need to make a dissector
packet-rtpmultiplex.c regestring to a UDP port as a starting point.



                        Dissect the multiplex header, decompress the rtp
header and have the RTP dissector dissecting
                        the resulting "RTP packet" - decompressed
header+data.

                        Could you help me in dissecting the multiplex
header and make this work.




                        Also I need to know the steps to write our own
filters in wireshark




                        It would be great help. Kindly reply as soon as
possible




                        Regards

                        Shruti


>>>>>>>>>>>>>>










"DISCLAIMER: This message is proprietary to Aricent and is intended solely for the use of the individual to whom it is addressed. It may contain privileged or confidential information and should not be circulated or used for any purpose other than for what it is intended. If you have received this message in error,please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly prohibited from using, copying, altering, or disclosing the contents of this message. Aricent accepts no responsibility for loss or damage arising from the use of the information transmitted by this email including damage from virus."