[wsgd <wsgd@xxxxxxx>]

Hello,

Into Tag definitions, you said :
- FT_BOOLEAN, 40 bits  = 5 bytes
- mask goes to 0x0800 and so on which is 2 bytes long (and so on)

Into proto_tree_add_boolean calls, you said : length = 1 byte
-> incoherent
-> proto_tree_add_boolean could not apply mask > 0x00ff

So try :
- proto_tree_add_boolean calls with length = 5 bytes   (NB: not sure 
value above 4 is accepted, must check)
- do not increment offset



Olivier


soumya damodaran a �crit :
> Hi,
>  
>       I am adding the 802.11k RRM capability Info which is a 5 Byte 
> data. This is what i added.
>  
>      
>                      proto_item *ti;
>                      proto_tree *sub_tree;
>                      guint16 capability;
>                      offset+=2;
>                      capability = tvb_get_letohs(tvb, offset);
>                      ti = proto_tree_add_uint_format (tree, 
> ff_rrm,tvb, offset, 5, capability,"RRM Capability Byte1: 0x%04X", 
> capability);
>                     sub_tree = proto_item_add_subtree (ti, 
> ett_tag_rrm_capability);
>  
> /* Begin : First Byte*/
>  
> proto_tree_add_boolean (sub_tree, hf_tag_link_measurement, tvb, 
> offset, 1, capability);
> proto_tree_add_boolean (sub_tree, hf_tag_neighbor_report_capability, 
> tvb, offset, 1, capability);
> proto_tree_add_boolean (sub_tree, 
> hf_tag_parallel_measurement_capability, tvb, offset, 1, capability);
> proto_tree_add_boolean (sub_tree, 
> hf_tag_repeated_measurement_capability, tvb, offset, 1, capability);
> proto_tree_add_boolean (sub_tree, hf_tag_beacon_passive_capability, 
> tvb, offset, 1, capability);
> proto_tree_add_boolean (sub_tree, hf_tag_beacon_active_capability, 
> tvb, offset, 1, capability);
> proto_tree_add_boolean (sub_tree, hf_tag_beacon_table_capability, tvb, 
> offset, 1, capability);
> proto_tree_add_boolean (sub_tree, 
> hf_tag_beacon_reporting_condition_capability, tvb, offset, 1, capability);
>
> /*End : First Byte */
>
> offset+=1;
>
> /*Begin: Second Byte */
>
> proto_tree_add_boolean (sub_tree, hf_tag_frame_measurement, tvb, 
> offset, 1, capability);
>
> proto_tree_add_boolean (sub_tree, hf_tag_channel_load_capability, tvb, 
> offset, 1, capability);
>
> proto_tree_add_boolean (sub_tree, hf_tag_noise_histogram_capability, 
> tvb, offset, 1, capability);
>
> proto_tree_add_boolean (sub_tree, 
> hf_tag_statistics_measurement_capability, tvb, offset, 1, capability);
>
> proto_tree_add_boolean (sub_tree, hf_tag_LCI_measurement_capability, 
> tvb, offset, 1, capability);
>
> proto_tree_add_boolean (sub_tree, hf_tag_LCI_Azimuth_capability, tvb, 
> offset, 1, capability);
>
> proto_tree_add_boolean (sub_tree, hf_tag_transmit_stream_capability, 
> tvb, offset, 1, capability);
>
> proto_tree_add_boolean (sub_tree, 
> hf_tag_triggered_transmit_stream_capability, tvb, offset, 1, capability);
>
> /* End: Second Byte */
>
> and Tag definitions as
>
> {"Link Measurement Capability", 
> "wlan_mgt.link.measurement",FT_BOOLEAN, 
> 40,TFS(&cf_rrm_link_flags),0x0001, NULL, HFILL }}  and hex values for 
> rest of the tags as 0x0002,0x0004,0x0008,0x0010,
>
> 0x0020,0x0040,0x0080,0x0100,0x0200, 0x0400,0x0800 and so on. But only 
> the first byte is getting displayed properly. The offset positions are 
> correct but it is not getting displayed. From 2nd byte onwards it is 
> diplaying blank dots only like this.
>
>  
>
> *.... .... .... .... .... .... .... .... .... .... = Frame Measurement 
> Capability: not implemented*
>
> How to display this 40 bit data properly? Please suggest as i am stuck 
> with this.
>
>  
>
> Thanks,
>
> Soumya
>
> ** 
>  
> ------------------------------------------------------------------------
>
> ___________________________________________________________________________
> Sent via:    Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx>
> Archives:    http://www.wireshark.org/lists/wireshark-dev
> Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
>              mailto:wireshark-dev-request@xxxxxxxxxxxxx?subject=unsubscribe