Hello Jeff,
Enclosed is a small capture file (99 records, 27Kb).
i can provide you with a bigger file if this excerpt does not contain IP frames.
Marc
-----Message d'origine-----
De : wireshark-dev-bounces@xxxxxxxxxxxxx [mailto:wireshark-dev-bounces@xxxxxxxxxxxxx] De la part de Jeff Morriss
Envoyé : vendredi 27 février 2009 15:53
À : Developer support list for Wireshark
Objet : Re: [Wireshark-dev] decoding depth & capture format
Marc Lebas wrote:
> Hello,
> Maybe its a User question but that could be a dev issue; anyway there
> was no answer to my question on the User's mailing list.
>
> The issue : i got different depth in decoding (GPRS over FR),
> depending on the capture file format :
> With rf5, the analysis is limited to GPRS protocol layers, but never
> decode IP which is the encapsulated protocol.
> With libpcap, it is OK; Wireshark go deeper as it is able to decode
> encapsulated IP frames in GPRS frames.
> Why such a behaviour ? Did i missed something in my config ?
> Here is my config on Linux (but the issue is the same on Windows) :
> - preferences : fr.encap: GPRS Network Service
> - cat k12_protos : "gprs_gb","fr"
Not having ever looked at a GPRS capture in Wireshark, I don't know.
(Small) sample captures would help.
___________________________________________________________________________
Sent via: Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx>
Archives: http://www.wireshark.org/lists/wireshark-dev
Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
mailto:wireshark-dev-request@xxxxxxxxxxxxx?subject=unsubscribe