["Gilbert Ramirez" <gram@xxxxxxxxxxxxxxx>]

Look at the text2pcap program in the wireshark distribution as an example.

You could also use text2pcap. If you can write a program to convert
your XML to a text-file hex-dump, then you can execute text2pcap to
convert that to a pcap file.

--gilbert

On 5/28/08, Hans Glück <hanschris.glueck@xxxxxxxx> wrote:
> Hello,
>
>  thanks for the reply, but I think I had a false start, sorry. I should describe my problem more detailed...
>
>  I have a proprietary program/file (this file contains data from a multiplexer-trace in a GSM device -> the protocol/ packets is based on HDLC). I can export the data out of proprietary file to a XML-file. Wireshark doesn`t understand that format so I have the 3 options posted at the wireshark wiki (PacketInput). Because of my limited time, I think it will be the best way if  I´ll choose the way to convert the XML-file to a file which wireshark understands (libpcap). But I do not understand how to convert it, I mean how do I add the global header etc? I will convert it from XML file to *.txt file and then?
>
>  This is an example out of the XML file (just for your information)
>
>  <Transaction type="OUT" device="1" endpoint="2" status="ACK" speed="FS" time="8.443 704 917">
>     <Packet id="OUT" speed="FS" time="8.443 704 917">
>         <deviceAddress>1</deviceAddress>
>         <endpointNumber>2</endpointNumber>
>         <crc5>0x18</crc5>
>     </Packet>
>     <Packet id="DATA0" speed="FS" time="8.443 707 900">
>         <length>10</length>
>         <data>F9 07 88 09 61 74 69 0D 85 F9</data>
>         <crc16>0x157A</crc16>
>     </Packet>
>  <Packet id="ACK" speed="FS" time="8.443 718 000"/>
>  </Transaction>
>
>
>  Regards,
>  Chris
>
>  ----- Ursprüngliche Mail ----
>  Von: Jaap Keuter <jaap.keuter@xxxxxxxxx>
>  An: Developer support list for Wireshark <wireshark-dev@xxxxxxxxxxxxx>
>  Gesendet: Sonntag, den 25. Mai 2008, 18:21:02 Uhr
>  Betreff: Re: [Wireshark-dev] Dissector - Read data from file
>
>
>  Hans Glück wrote:
>  > Hello,
>  >
>  > I´m writing a dissector but I do not want to read the data live from the network.
>
>  The dissector doesn't care where the data comes from.
>
>  > I have a file (~60MB) with the data I want to dissect. What should I do that I can read the data from this file (e.g. that the user
>  can choose the file he/she want to analyze).
>
>  If the file is in any of the many formats Wireshark can read just open it.
>  You might want to split the file up before loading it, since it might consume
>  your systems memory with state information.
>
>  > Regards
>  > Chris
>
>  _______________________________________________
>  Wireshark-dev mailing list
>  Wireshark-dev@xxxxxxxxxxxxx
>  http://www.wireshark.org/mailman/listinfo/wireshark-dev
>
>
>
>
>       __________________________________________________________
>  Gesendet von Yahoo! Mail.
>  Dem pfiffigeren Posteingang.
>  http://de.overview.mail.yahoo.com
>  _______________________________________________
>
> Wireshark-dev mailing list
>  Wireshark-dev@xxxxxxxxxxxxx
>  http://www.wireshark.org/mailman/listinfo/wireshark-dev
>
>