Just note:
Most AMR codec/decoders take all three streams and choose the best one
they can use but what you would hear as a middleman might not be what
someone in the other side of a radio link is hearing. That is if we
feed a codec in the middle we probably feed them good frames and it
will use the higher quality stream codec (usu 14.4kbps) but the actual
receiver might be using another lower quality stream (hearing flutes
when listening to violins) because the radio link does not provide
enough bandwidth for the high quality one.
That means listening to the AMR that passes through a Iu/Nb link would
be useful for snooping a conversation but non useful for diagnostic
purposes as you might not hear the same audio the other folk gets.
On Nov 30, 2007 4:43 PM, Anders Broman <anders.broman@xxxxxxxxxxxx> wrote:
>
>
> Hi,
> AMR is a licensed codec so it can't be provided with Wireshark but a plugin
> interface exists to add your own codecs you'll have to do it yourself
> though.
> See also some other recent posts with AMR in the subject line.
> Regards
> Anders
>
> ________________________________
>
> From: wireshark-dev-bounces@xxxxxxxxxxxxx
> [mailto:wireshark-dev-bounces@xxxxxxxxxxxxx] On Behalf Of Sanghee Lee
> Sent: den 30 november 2007 01:47
>
> To: wireshark-dev@xxxxxxxxxxxxx
> Subject: [Wireshark-dev] How to playback the AMR in RTP packet
>
>
>
>
>
>
>
>
> Hi,
>
> I know "VOIP calls" in Wireshark for playing the RTP packet.
>
> But, the VOIP calls only can play the G.711. I'd like to play the AMR
> payload.
>
>
>
> Thanks in advance,
>
> Leo
> _______________________________________________
> Wireshark-dev mailing list
> Wireshark-dev@xxxxxxxxxxxxx
> http://www.wireshark.org/mailman/listinfo/wireshark-dev
>
>
--
This information is top security. When you have read it, destroy yourself.
-- Marshall McLuhan