[Solomon Peachy <solomon@xxxxxxxxxxxxxx>]

Howdy, folks!

The attached patch (against r23226) does three things:

1) Updates the capture_wlancap() function to properly handle the varying 
   lengths of the different frame formats properly.
2) Minor tweaks to the dissector to bring it in line with the latest 
   specs.
3) Lastly, don't try to decode newer versions of the header.

In the next day or so, I'll be following up with another patch that adds 
support for a new rev of the avs_wlancap header -- but I wanted to get 
this out first.

Thanks!

 - Solomon
-- 
Solomon Peachy                        solomon@xxxxxxxxxxxxxx
AbsoluteValue Systems                 http://www.linux-wlan.com
721-D North Drive                     +1 (321) 259-0737  (office)
Melbourne, FL 32934                   +1 (321) 259-0286  (fax)

Index: epan/dissectors/packet-wlancap.c
===================================================================
--- epan/dissectors/packet-wlancap.c	(revision 23226)
+++ epan/dissectors/packet-wlancap.c	(working copy)
@@ -76,7 +76,7 @@
   struct wlan_header_v1 v1_hdr;
   guint32 sequence;
   guint32 drops;
-  guint8 sniffer_addr[6];
+  guint8 receiver_addr[6];
   guint8 pad[2];
 };
 
@@ -86,7 +86,7 @@
 static int hf_wlan_mactime = -1;
 static int hf_wlan_hosttime = -1;
 static int hf_wlan_phytype = -1;
-static int hf_wlan_channel = -1;
+static int hf_wlan_frequency = -1;
 static int hf_wlan_datarate = -1;
 static int hf_wlan_antenna = -1;
 static int hf_wlan_priority = -1;
@@ -97,7 +97,7 @@
 static int hf_wlan_encoding = -1;
 static int hf_wlan_sequence = -1;
 static int hf_wlan_drops = -1;
-static int hf_wlan_sniffer_addr = -1;
+static int hf_wlan_receiver_addr = -1;
 static int hf_wlan_padding = -1;
 
 static gint ett_wlan = -1;
@@ -110,13 +110,24 @@
 void
 capture_wlancap(const guchar *pd, int offset, int len, packet_counts *ld)
 {
-    /* XXX eventually add in a version test. */
-    if(!BYTES_ARE_IN_FRAME(offset, len, (int)sizeof(struct wlan_header_v1))) {
-        ld->other ++;
+    guint32 cookie = 0;
+    guint32 length = 0;
+
+    if (!BYTES_ARE_IN_FRAME(offset, len, sizeof(guint32) *2 )) {
+        ld->other++;
         return;
     }
-    offset += sizeof(struct wlan_header_v1);
 
+    cookie = pntohl(pd);
+    length = pntohl(pd+sizeof(guint32));
+
+    if(!BYTES_ARE_IN_FRAME(offset, len, length)) {
+        ld->other++;
+        return;
+    }
+
+    offset += length;
+
     /* 802.11 header follows */
     capture_ieee80211(pd, offset, len, ld);
 }
@@ -179,7 +190,7 @@
 			   BASE_DEC, NULL, 0x0, "", HFILL } },
     { &hf_wlan_phytype, { "PHY type", "wlancap.phytype", FT_UINT32, BASE_DEC,
 			  VALS(phy_type), 0x0, "", HFILL } },
-    { &hf_wlan_channel, { "Channel", "wlancap.channel", FT_UINT32, BASE_DEC,
+    { &hf_wlan_frequency, { "Frequency", "wlancap.frequency", FT_UINT32, BASE_DEC,
 			  NULL, 0x0, "", HFILL } },
     { &hf_wlan_datarate, { "Data rate", "wlancap.datarate", FT_UINT32,
 			   BASE_DEC, NULL, 0x0, "", HFILL } },
@@ -201,8 +212,8 @@
 			   BASE_DEC, NULL, 0x0, "", HFILL } },
     { &hf_wlan_drops, { "Known Dropped Frames", "wlancap.drops", FT_UINT32,
 			   BASE_DEC, NULL, 0x0, "", HFILL } },
-    { &hf_wlan_sniffer_addr, { "Sniffer Address", "wlancap.sniffer_addr", FT_ETHER,
-			       BASE_NONE, NULL, 0x0, "Sniffer Hardware Address", HFILL } },
+    { &hf_wlan_receiver_addr, { "Receiver Address", "wlancap.receiver_addr", FT_ETHER,
+			       BASE_NONE, NULL, 0x0, "Receiver Hardware Address", HFILL } },
     { &hf_wlan_padding, { "Padding", "wlancap.padding", FT_BYTES,
 			  BASE_NONE, NULL, 0x0, "", HFILL } },
   };
@@ -235,11 +246,16 @@
     offset = 0;
 
     version = tvb_get_ntohl(tvb, offset) - WLANCAP_MAGIC_COOKIE_BASE;
+
     length = tvb_get_ntohl(tvb, offset+4);
 
     if(check_col(pinfo->cinfo, COL_INFO))
         col_add_fstr(pinfo->cinfo, COL_INFO, "AVS WLAN Capture v%x, Length %d",version, length);
 
+    if (version > 2) {
+      goto skip;
+    }
+
     if (check_col(pinfo->cinfo, COL_FREQ_CHAN)) {
       col_add_fstr(pinfo->cinfo, COL_FREQ_CHAN, "%u",
 		   tvb_get_ntohl(tvb, offset + 28));
@@ -257,6 +273,8 @@
 
     /* Dissect the packet */
     if (tree) {
+      guint32 channel;
+
       ti = proto_tree_add_protocol_format(tree, proto_wlancap,
             tvb, 0, length, "AVS WLAN Monitoring Header");
       wlan_tree = proto_item_add_subtree(ti, ett_wlan);
@@ -271,15 +289,34 @@
       offset+=8;
       proto_tree_add_item(wlan_tree, hf_wlan_phytype, tvb, offset, 4, FALSE);
       offset+=4;
+
       /* XXX cook channel (fh uses different numbers) */
-      proto_tree_add_item(wlan_tree, hf_wlan_channel, tvb, offset, 4, FALSE);
+      channel = tvb_get_ntohl(tvb, offset);
+      if (channel < 256)
+	      proto_tree_add_uint_format(wlan_tree, hf_wlan_frequency, tvb, offset,
+					 channel, 
+					 4, "Channel: %u", channel );
+      else if (channel < 10000)
+	      proto_tree_add_uint_format(wlan_tree, hf_wlan_frequency, tvb, offset,
+					 channel, 
+					 4, "Frequency: %u MHz", channel );
+      else
+	      proto_tree_add_uint_format(wlan_tree, hf_wlan_frequency, tvb, offset,
+					 channel, 
+					 4, "Frequency: %u KHz", channel );
       offset+=4;
       /* XXX - all other 802.11 pseudo-headers use 500Kb/s, not 100Kb/s,
          as the units. */
       datarate = tvb_get_ntohl(tvb, offset);
-      proto_tree_add_uint_format(wlan_tree, hf_wlan_datarate, tvb, offset,
-				 4, datarate * 100,
-				 "Data Rate: %u Kb/s", datarate * 100);
+      if (datarate < 100000) {
+	proto_tree_add_uint_format(wlan_tree, hf_wlan_datarate, tvb, offset, 
+				   datarate * 100, 
+				   4, "Data Rate: %u Kb/s", datarate * 100);
+      } else {
+	proto_tree_add_uint_format(wlan_tree, hf_wlan_datarate, tvb, offset, 
+				   datarate, 
+				   4, "Data Rate: %u bps", datarate);
+      }
       offset+=4;
       proto_tree_add_item(wlan_tree, hf_wlan_antenna, tvb, offset, 4, FALSE);
       offset+=4;
@@ -304,7 +341,7 @@
 	      proto_tree_add_item(wlan_tree, hf_wlan_drops, tvb, offset,
 			4, FALSE);
 	      offset+=4;
-	      proto_tree_add_item(wlan_tree, hf_wlan_sniffer_addr, tvb, offset,
+	      proto_tree_add_item(wlan_tree, hf_wlan_receiver_addr, tvb, offset,
 			6, FALSE);
 	      offset+=6;
 	      proto_tree_add_item(wlan_tree, hf_wlan_padding, tvb, offset,
@@ -313,6 +350,7 @@
       }
     }
 
+ skip:
     offset = length;
 
     /* dissect the 802.11 header next */

Attachment: pgpmxvrEGrGUy.pgp
Description: PGP signature