[Jaap Keuter <jaap.keuter@xxxxxxxxx>]

Hi,

The buildbot is working on revision 22911, which contains this feature.

Thanx,
Jaap

Jaap Keuter wrote:
> Hi,
>
> I'll clean up the dissector source somewhat and add two port mappings.
> They'll be on the IANA registered ports though, and I suggest you'll do 
> the same, if possible. To convenience you I'll make them configurable 
> through the preferences.
> Hopefully I'll get it done later tonight.
>
> Thanx,
> Jaap
>
> Filippo Margiotta wrote:
> > Hi Jaap,
> > now the mikey dissector is working as I was looking for.
> >
> > I suggest you to add the two lines :
> >
> >     dissector_add("udp.port", 4359, mikey_handle);
> >     dissector_add("tcp.port", 4359, mikey_handle);
> >
> > after the line
> >     dissector_add_string("key_mgmt", "mikey", mikey_handle);
> >
> > in the proto_reg_handoff_mikey() function as you suggested.
> >
> > The port 4359 are ufficially assigned by IANA.
> >
> > I cannot commit the changes because I haven't the right.
> > Thanks again.
> > Filippo
> >
> >
> >
> > 2007/9/18, Filippo Margiotta < filippo.margiotta@xxxxxxxxx 
> > <mailto:filippo.margiotta@xxxxxxxxx>>:
> >
> >     Hi Jaap,
> >     tomorrow I will test your suggestion.
> >
> >     Thank you very much!
> >     Filippo
> >
> >
> >
> >     2007/9/18, Jaap Keuter < jaap.keuter@xxxxxxxxx
> >     <mailto:jaap.keuter@xxxxxxxxx>>:
> >
> >         Hi,
> >
> >         Add this line to proto_reg_handoff_mikey() in
> >         epan/dissectors/packet- mikey.c:
> >
> >            dissector_add("udp.port", 2269, mikey_handle);
> >
> >         as I assume you're using the IANA registered UDP port.
> >
> >         Thanx,
> >         Jaap
> >
> >         Filippo Margiotta wrote:
> >         >  Hi All,
> >         >  I would like to use the mikey dissector in a different way it
> >         is used now.
> >         >  At the moment, a mikey packet is captured only as key-mgmt session
> >         >  attributes in the SDP protocol.
> >         >
> >         >  Could somebody give me, please, some information about what to
> >         modify in
> >         >  the current implementation to have a mikey capture dissector
> >         that can
> >         >  directly parse an UDP datagram containing directly a mikey
> >         message?
> >         >
> >         >  Thanks in advance,
> >         >  Filippo
> >         >