Hi,
This is most probably a bug. Please file a bug report, preferably with a
sample trace.
Best regards
Anders
________________________________________
Från: wireshark-dev-bounces@xxxxxxxxxxxxx
[mailto:wireshark-dev-bounces@xxxxxxxxxxxxx] För Xavier Ameziane
Skickat: den 26 mars 2007 12:29
Till: wireshark-dev@xxxxxxxxxxxxx
Ämne: [Wireshark-dev] Diameter AVP decoding : Same AVP codes withdifferent
names
Hello
I have a question about the way Wireshark decodes Diameter AVP. Is the
"ApplicationID" taken into account when Wireshark decodes an AVP ?
Example :
- in 3GPP CX/DX Application(ID=16777216, 3GPP TS 29.228 and 29.229), the AVP
code 1 is "Visited-Network-Identifier". The vendor-Id for this AVP is TGPP
(10415)
- in 3GPP Gmb Application (ID=16777223, 3GPP TS 29.061), the AVP code 1 is
"3GPP-IMSI". The vendor-Id for this AVP is also TGPP (10415)
I created my own dictionnary for 3GPP Gmb Application and, normally,
Wireshark should display the right name according to the "ApplicationID" but
I don't think it is the case... Wireshark always displays me the value in
3GPP Gmb dictionnary. If I erase the AVP code 1 from my "3GPP Gmb"
dictionnary, it displays the AVP name contained in the "3GPP CD/DX"
dictionnary...as if it doesn't take into account the ApplicationID...
Is it normal ? Do I make a mistake somewhere in my understanding ?
Thanks by advance
Xavier
________________________________________
Découvrez une nouvelle façon d'obtenir des réponses à toutes vos questions !
Profitez des connaissances, des opinions et des expériences des internautes
sur Yahoo! Questions/Réponses.