[<durgabhavani.uppuluru@xxxxxxxxx>]

Hi,

 

I’ve made the following changes in the packet:

opcode length : 2 bytes

opcode value : 00 99.

 

It works.

 

Thanks a lot for your help.

 

Regards,

Bhavani.

---

From: DurgaBhavani Uppuluru

Sent: Tuesday, February 27, 2007 7:44 PM
To: 'wireshark-dev@xxxxxxxxxxxxx'
Subject: RE: local operation code in MAP

 

Hi,

 

I’ve given the value for operation code, not the ASN1 compiler.

 

I’ve tried below suggestion but still got the problem.

Operation code length : 02, and the operation code : H’81 H’99.

 

I tried to print the opcode value read from dissect_ber_integer, dissect_ber_integer64

They print negative number for int format & huge positive number for unsigned format.

 

Best Regards,

Bhavani.

 

 

 

From: Florent.Drouin@xxxxxxxxxxxxxxxxx
Date: Tue, 27 Feb 2007 13:05:42 +0100

      Hi,

You said:

"Hex value shown, in the bytes pane is 99."

Is this value field by yourself, or by an ASN1 compiler ?

I think, It could be a problem of long form encoding.

Could you try to use H'81 H'99 instead of H'99 for the operation code in

the message to decode ?

Regards

Florent

 

---

From: DurgaBhavani Uppuluru
Sent: Tuesday, February 27, 2007 12:08 PM
To: 'wireshark-dev@xxxxxxxxxxxxx'
Subject: RE: local operation code in MAP

 

Hi Again,

 

I’ve tried latest svn version files too, still I get the same problem.

I’ve added gsmmap, ranap directories & packet-gtp.c from svn Revision 20934, on top of wireshark-0.99.5 sources.

 

Please help me.

 

Best Regards,

Bhavani.

---

From: DurgaBhavani Uppuluru

Sent: Tuesday, February 27, 2007 9:41 AM
To: 'wireshark-dev@xxxxxxxxxxxxx'
Subject: RE: local operation code in MAP

 

Hi,

 

I’m using wireshark 0.99.5 sources.

The below code is right.

I’ve added the operations in the same way.

 

Here are the steps followed:

 

My GSMMAP.asn files looks

 

1. OperationLocalvalue ::= INTEGER{

        updateLocation (2),

            :

        noteMM-Event (89),

        operation1(152),

        operation2(153)

}

 

2. Operation descriptions of operation1 & operation2 are added

 

3. packet-gsm_map-template.c is updated with

 

gsm_map_opr_code_strings[]={

{   2, "updateLocation" },

:

{   152, "operation1" },

{   153, "operation2" }

}

 

dissect_invokeData()

switch(opcode){

  case  2: /*updateLocation*/ dissect_gsm_map_UpdateLocationArg();  break;

            :

  case 152: /*operation 1*/ dissect_gsm_map_Operation1Arg(); break;

  case 153: /*operation 2*/ dissect_gsm_map_Operation2Arg(); break;

}

return offset;

}

           

3. makefile is used to generate packet-gsm_map.c, packet-gsm_map.h.

Options used with asn2wrs are:

python ../../tools/asn2wrs.py -b -e -p gsm_map -c gsmmap.cnf -s packet-gsm_map-template GSMMAP.asn

 

4. Generated packet-gsm_map.c, packet-gsm_map.h are copied to ../../epan/dissectors folder.

Standard makefile present in the wireshark-0.99.5 directory is used to build the wireshark exe.

 

The same steps when followed with operation codes with 90,91 or 94,95  work fine.

 

Thanks for your time.

 

Best Regards,

Bhavani.

 

From: "Anders Broman \(AL/EAB\)" <anders.broman@xxxxxxxxxxxx>
Date: Mon, 26 Feb 2007 16:21:09 +0100

Hi,

Are you running the latest SVN version of Wireshark?

I asume that "adding an operation with local value 153 to GSMMAP" means that you are editing the sources,

what happens if you change:

GSMMAPOperationLocalvalue ::= INTEGER{
 updateLocation (2),

:

 noteMM-Event (89)
        }

To:

 noteMM-Event (89),

 your-string(153)
        }

in GSMMAP.asn and rebuild the dissector using asn2wrs?

Best regards

Anders

 

---

From: DurgaBhavani Uppuluru

Sent: Monday, February 26, 2007 10:46 AM
To: 'wireshark-dev@xxxxxxxxxxxxx'
Subject: RE: local operation code in MAP

 

Hi Anders,

 

Hex value shown, in the bytes pane is 99.

I’ve tried other numbers too (>150) and I get similar result.

 

Best Regards,

Bhavani.

 

From: "Anders Broman" <a.broman@xxxxxxxxx>
Date: Sun, 25 Feb 2007 19:55:43 +0100

Hi,

What is the hex value shown in the bytes pane when marking localvalue in the

middle pane?

Best regards

Anders

 

---

From: DurgaBhavani Uppuluru
Sent: Sunday, February 25, 2007 2:36 PM
To: 'wireshark-dev@xxxxxxxxxxxxx'
Subject: local operation code in MAP

 

Hi All,

 

Greetings to you.

 

I’m adding an operation with local value 153 to GSMMAP.

But dissector does not recognize 153, it reports Unknown -103.

Kindly tell me how to set this value.

 

Thanks,

Bhavani.

The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments.

WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.

www.wipro.com