[Sleep Less <sleepless_tlv@xxxxxxxxx>]

Thanks for everyone's tips. I'm still stuck. PDB files do exist (we're talking about the dissectors.lib segement since it aggregates the dissectors).

When I implement Douglas's method the breakpoints are not reached, and Wireshark reports that the relevant dissector had a problem.

Douglas Pratley <Douglas.pratley@xxxxxxxxxx> wrote:

It�s the .pdb files that it needs � they should have been created when the file was compiled. Is this a dynamically loaded plugin, or a statically linked object? MSVC 6 can be a bit rubbish at putting breakpoints in dynamically loaded code.

 

If you have MSCV 7.0 installed, you could try debugging under that � it seems to be a lot smarter about breakpoints (still build using MSVC 6.0; the debug symbols are compatible).

 

Alternatively, there is a gratuitous hack that you can try if nothing else works.

 

At the head of the file you want to stop in, put:

 

#define _DEBUG

#include <crtdbg.h>

 

Where you want to stop, put:

    _CrtDbgBreak();

 

Compile it up (if this fails, then I�d give up on this idea � it works for me in TShark where I tried it), then run in the debugger.

 

This will trigger a Win32 assert, and drop you into the debugger.

 

Obviously, don�t leave this in release code!

 

---

From: wireshark-dev-bounces@xxxxxxxxxxxxx [mailto:wireshark-dev-bounces@xxxxxxxxxxxxx] On Behalf Of Sleep Less
Sent: 01 December 2006 11:55
To: Developer support list for Wireshark
Subject: Re: [Wireshark-dev] Compiling under MSVC 6.0 - simple Q,clear cut A ?

 

Well not quite - the compiler still disables breakpoint in the dissector, as it fails to see

the (symbolic) connection. Methinks you need .bsc files for that, which MSVC generates when you compile from the IDE, but apprently nmake does not.

any ideas?

Douglas Pratley <Douglas.pratley@xxxxxxxxxx> wrote:

 

---

From: wireshark-dev-bounces@xxxxxxxxxxxxx [mailto:wireshark-dev-bounces@xxxxxxxxxxxxx] On Behalf Of Sleep Less
Sent: 01 December 2006 11:42
To: Developer support list for Wireshark
Subject: Re: [Wireshark-dev] Compiling under MSVC 6.0 - simple Q,clear cut A ?

 

Thanks. Done all the wiki recommendations. I can now single/step debug main.c,

but as you can imagine, my interest lies deep in one of the dissectors - e.g. packet-h263.c etc. How to I get to the situation I can single step through those?

thanks

Douglas Pratley <Douglas.pratley@xxxxxxxxxx> wrote:

[Apologies if this message appears twice - I am having some trouble persuading exchange to be consistent about which SMTP address it uses for outgoing email, and my first try bounced as a non-menber]

 

 

The wiki tips page has a couple of useful sections on debugging and setting up browse info for MSVC.

 

http://wiki.wireshark.org/Development/Tips

 

I�ve also done it by creating a dummy static library project and using Wireshark as the �program� under the debug settings (useful for putting a breakpoint in start-up code).

 

Cheers

 

Doug

 

 

---

From: wireshark-dev-bounces@xxxxxxxxxxxxx [mailto:wireshark-dev-bounces@xxxxxxxxxxxxx] On Behalf Of Sleep Less
Sent: 01 December 2006 10:36
To: Developer support list for Wireshark
Subject: Re: [Wireshark-dev] Compiling under MSVC 6.0 - simple Q,clear cut A ?

 

Hi,

thanks for the willingness to assist.

I did one thing : created an empty directory c:\wireshark-win32-libs

and then ran the nmake -f makefile.nmake all

with no further problems whatsoever.

Since my install was a "clean" one (no previous wireshark builds etc.)

I guess this may happen to others as well.

If I may, one other short Q - the manual does not specify how I can use the MSVC IDE

to debug wireshark, which was my main reason for building it.

Is there a way to do that?

thanks

Anders Broman <a.broman@xxxxxxxxx> wrote:

Hi,
What version are you trying to build?
What does the line
DOWNLOAD_PREFIX
In the file tools/win32-setup.sh say?
BR
Anders

________________________________________
Fr�n: wireshark-dev-bounces@xxxxxxxxxxxxx
[mailto:wireshark-dev-bounces@xxxxxxxxxxxxx] F�r Sleep Less
Skickat: den 1 december 2006 09:43
Till: Developer support list for Wireshark
�mne: Re: [Wireshark-dev] Compiling under MSVC 6.0 - simple Q,clear cut A ?

Hi,
I have faithfully followed the Cygwin/packages installation, done the
distclean and verify_tools stages. At the setup stage I get an error at the
glib part:
bash tools\win32-setup.sh --appverify cl link nmake bash
bison flex env grep /usr/bin/find perl env python sed
unzip wget
Checking for required applications:
cl: /cygdrive/d/PROGRA~1/MICROS~1/VC98/BIN/cl
link: /cygdrive/d/PROGRA~1/MICROS~1/VC98/BIN/link
nmake: /cygdrive/d/PROGRA~1/MICROS~1/VC98/BIN/nmake
bash: /usr/bin/bash
bison: /usr/bin/bison
flex: /usr/bin/flex
env: /usr/bin/env
grep: /usr/bin/grep
/usr/bin/find: /usr/bin/find
perl: /usr/bin/perl
env: /usr/bin/env
python: /cygdrive/c/ibmtools/python22/python
sed: /usr/bin/sed
unzip: /usr/bin/unzip
wget: /usr/bin/wget
****** glib-2.6.6.zip ******
No HTTP proxy specified (http_proxy and HTTP_PROXY are empty).
Downloading gtk2.6/glib-2.6.6.zip into , installing into glib

ERROR: Can't find glib
So while I fully believe it "cleanly" works for many, obviously there is
something missing in the manual.
Any tips would be much appreciated.
Thanks

Anders Broman wrote:
Hi,
And note that Wireshark can't be built "without the other tools"
on any system.
BR
Anders

-----Ursprungligt meddelande-----
Fr�n: wireshark-dev-bounces@xxxxxxxxxxxxx
[mailto:wireshark-dev-bounces@xxxxxxxxxxxxx] F�r Jaap Keuter
Skickat: den 30 november 2006 22:16
Till: Developer support list for Wireshark
�mne: Re: [Wireshark-dev] Compiling under MSVC 6.0 - simple Q, clear cut A ?

Hi,

Just faithfully follow the developer guides guidelines on setting up your
development environment, including cygwin and its tools, as well gathering
the libraries.

Tried it a couple of times, never failed on me.

Thanx,
Jaap

On Thu, 30 Nov 2006, Sleep Less wrote:

> Hi All,
> from Andre Martin's recent (Nov 2) posting it is not clear to me if
Wireshark
> can be indeed compiled under MSVC 6.0 in a hassle free manner?
> The developers doc is really partial, e.g on page 24 section 2.6.2 the
nmake example
> seems to give an example of a failure, not of the correct usage.
> Also instruction on how to run wireshark on MSVC6 debugger (2.5.3) are
missing.
> So I'd be most appreciative on anyone who has done it can give a short
description of what it involves.
> Initial system is assumed to be a "clean" MSVC 6.0, no other tools,
Windows XP SP2.
> thanks,
> Haim
>
>
> ---------------------------------
> Access over 1 million songs - Yahoo! Music Unlimited.

_______________________________________________
Wireshark-dev mailing list
Wireshark-dev@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-dev

_______________________________________________
Wireshark-dev mailing list
Wireshark-dev@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-dev


________________________________________
Everyone is raving about the all-new Yahoo! Mail beta.

_______________________________________________
Wireshark-dev mailing list
Wireshark-dev@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-dev

 

 

---

Want to start your own business? Learn how on Yahoo! Small Business.

This message should be regarded as confidential. If you have received this email in error please notify the sender and destroy it immediately.
Statements of intent shall only become binding when confirmed in hard copy by an authorised signatory. The contents of this email may relate to dealings with other companies within the Detica Group plc group of companies.

Detica Limited is registered in England under No: 1337451.

Registered offices: Surrey Research Park, Guildford, Surrey, GU2 7YP, England.

_______________________________________________
Wireshark-dev mailing list
Wireshark-dev@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-dev

 

 

---

Check out the all-new Yahoo! Mail beta - Fire up a more powerful email and get things done faster.

_______________________________________________
Wireshark-dev mailing list
Wireshark-dev@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-dev

 

 

---

Cheap Talk? Check out Yahoo! Messenger's low PC-to-Phone call rates.

_______________________________________________
Wireshark-dev mailing list
Wireshark-dev@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-dev

---

Access over 1 million songs - Yahoo! Music Unlimited.