Checked in.
BR
Anders
-----Ursprungligt meddelande-----
Från: wireshark-dev-bounces@xxxxxxxxxxxxx
[mailto:wireshark-dev-bounces@xxxxxxxxxxxxx] För Rene Pilz
Skickat: den 27 november 2006 23:08
Till: Developer support list for Wireshark
Ämne: Re: [Wireshark-dev] frame relay bugfix
Hi
This patch consists also the last issues. Additionally it solves:
- For the SSCOP frames the AAL5 decoding was not performed due to an
earlier patch. This caused that no SSCOP message was properly decoded.
- As the detection between a LANE frame and a SSCOP frame is rather hard
a switch within the atm dissector is included which enforce SSCOP
dissecting over a LANE frame. At the moment I do not see a better
solution for that.
Rene Pilz
On Fri, 2006-11-24 at 15:53 +0100, Rene Pilz wrote:
> Hi
>
> Attached is a patch for following items:
> - Frame Relay: Calculate the size of the frame relay header larger than
> 2 bytes correctly
> - ERF File: In approx 10% of the cases ethereal is not able to recognize
> the ERF file correctly. So the file format check of erf is moved more to
> the beginning of the function. This is not real a solution, but as erf
> files are not that seldom this might be acceptable.
> - Added Columns: Add columns for DLCI (Frame Relay) and TLLI (GSM
> BSSGP). As these are crucial Identifiers within this protocol this is
> rather useful. At least they asked me several times.
>
> So please take a look at it. Thanks.
>
> Best Regards
> Rene
>
> _______________________________________________
> Wireshark-dev mailing list
> Wireshark-dev@xxxxxxxxxxxxx
> http://www.wireshark.org/mailman/listinfo/wireshark-dev
--
Dipl-Ing (FH) MSc. C.E René Pilz
ftw. Telekommunications Research Center Vienna http://www.ftw.at
Tech Gate Vienna, Donaucitystraße 1, A-1220 Wien
Mobile: +43 664 8269871 Office: +43 1 5052830-13 Fax: +43 1 5052830-99