I thought I would pass on some more info I found that you may want to consider changing in the User
Guide. I’m using 19086 for Wireshark 0.99.3.
- On the first page (the Title
page) it has a comma after Ed Warnicke which I believe to be incorrect.
- Section 1.1.3 – It states
“Despite its name, Wireshark can capture traffic…” I
believe the “Despite its name” part can be taken out since the
name is now Wireshark and not Ethereal.
- Section 1.2.2 – Suse Linux
is listed. You may want to uppercase SUSE.
- Section 1.6.2 – It states
“For example, there is an explanation how to capture…” I
believe the word on is
missing before the word how.
- Section 4.7 – It states “…so
you will have a guide what to do:”. I believe the word of is missing before the word what.
- Section 4.9 – It states “The
selection which protocols are counted cannot be changed.” I believe
the word of is missing after
the word selection.
- Section 5.2 – There is a
word behaviour in there. I
believe it should be spelled behavior.
- Section 5.2.1 – Screen shot
still from Ethereal.
- Section 5.3.1 – Screen shot
still from Ethereal.
- Section 5.4.1 – Screen shot
still from Ethereal.
- Section 5.5 – It states “…the
captured data is spreaded over several…” I believe the word
spreaded should be spread.
This is like this a second time in the last paragraph of the shaded block
of info.
- Section 5.6.1 – Screen shot
still from Ethereal.
- Section 5.6.2 – Screen shot
still from Ethereal.
- Section 5.6.4 – Screen shot
still from Ethereal.
- Section 5.6.5 – Screen shot
still from Ethereal.
- Section 5.6.6 – Screen shot
still from Ethereal.
- Section 6.2.1 – It states
“The following table gives an overview which functions…”.
I believe the word of is
missing after the word overview.
- Section 6.2.2 – It states
“The following table gives an overview which functions…”.
I believe the word of is
missing after the word overview.
- Section 6.2.3 – It states
“The following table gives an overview which functions…”.
I believe the word of is
missing after the word overview.
- Figure 6.6 – Screen shot
doesn’t really match the paragraph that explains it. The paragraph
says packets 1-10 are hidden and that it starts with 11 however the screen
shot shows starting at 14.
- Section 6.3 – It states “A
list of such fields is available in the Wireshark in the Add _expression_…”
Something needs changed here. Doesn’t sound correct.
- Section 6.5 – For the
Cancel option it states “you can leave the Add _expression_…
dialog box without any effect by clicking the Cancel”. I believe the
word button is missing from the end.
- Section 7.5.2 – It states
“The tooltip of the higher level protocol setting will note you if…”
I believe the word note should be notify.
- Section 7.6 – It states “There
are two possible ways to do this conversations…” I believe the
word this would be these.
- Section 7.6.1 – It states
“Name resolution can be invaluable while working with Wireshark and
may save you even hours of work.” I believe this should be may even save you hours of work. Put
the word even after may.
- Section 7.6.1 – It states
“…because you can’t connect a name server…”.
I believe the word to should
be after the word connect.
Again I thought I would do my very small part in
contributing to this fantastic product. Thank you.