Wireshark-bugs: [Wireshark-bugs] [Bug 8865] If another profile is opened that also has the defau

Date Prev · Date Next · Thread Prev · Thread Next
Date Index · Thread Index · Other Months · All Mailing Lists
From: bugzilla-daemon@xxxxxxxxxxxxx
Date: Fri, 28 Jun 2013 22:26:53 +0000

Comment # 1 on bug 8865 from 
Created attachment 11097 [details]
Four configuration profiles to be used for testing

Test Procedure
1. Copy the attached profiles to your 'profiles' directory 
2. Open an unpatched version of the Wireshark, select profile
   "TEST-1 default capture.columns pref", and exit Wireshark.
3. Open Wireshark and select the Capture>Options menu.  Note that all six
   columns are displayed with their default values. 
4. Close the dialog, select profile "TEST-2 default capture.columns pref", 
   and select the Capture>Options menu.  Note that only the "Interface"
   column is displayed. 
5. Restart WS and all six columns will be displayed. 
6. Close the dialog and select profile "TEST-3 - 4 cols - int, snap 512,
   bufs 4, filt". Select Capture>Options. Notice that the four configured 
   cols are displayed but their values are unchanged. Snaplen and Buffer
   should be "512" and "4", respectively. 
7. Close the dialog and select profile "TEST-4 - 6 cols - int, link,
   snap 64K, buf 6, prom, filt". Select Capture>Options and none of the
   columns are displayed. Only the 'Capture' checkbox is displayed.

You are receiving this mail because:
  • You are watching all bug changes.