https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=6755
--- Comment #16 from Andreas Heise <andreas.heise@xxxxxxxxxxxxx> 2012-01-27 02:47:00 PST ---
(In reply to comment #15)
> (In reply to comment #14)
> > (In reply to comment #10)
> > > Created attachment 7736 [details]
> > > screenshoot of problem with the patch
> > >
> > > when I apply the patch to SVN 40488 then wireshark (libwireshark.dll) crash
> > > during load of some SIP-TLS captures, attached is a
> > > screenshoot. Problem does not occur with a SIP-TLS
> > > captures. If I revert the patch, all is fine.
> > > I'll try to find a unconfidential pcap to provide it for analyse
> > >
> > > tested with XP 32bit
> >
> > cristian: pls. either:
> >
> > 1. provide a capture that produces this problem
> > 2. run it on a linux/unix machine and send me a backtrace from
> > the coredump.
> >
> > a. to produce the coredump, make sure you did:
> > ulimit -c unlimited
> > before running patched wireshark
> >
> > b. to get the backtrace use gdb on the coredump like this:
> > gdb .libs/lt-wireshark core
> > and then under the gdb prompt use "bt" to get the trace.
> >
> > (on some systems the cores are dumped with pre-configured names,
> > spec'ed in: /proc/sys/kernel/core_pattern)
>
> Hi Cristian,
>
> some more details about the crash:
>
> it happens on "tcp port number reused" means same IPs:ports, but new tcp
> sequence.
>
> does it help? I'll try to find a capture asap
>
> regards,
> Andreas
I googled this capture with "tcp port number reused" which create the same
crash....
https://supportforums.cisco.com/servlet/JiveServlet/download/3494413-117425/capthis_out.pcap.zip
regards,
Andreas
--
Configure bugmail: https://bugs.wireshark.org/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.