[bugzilla-daemon@xxxxxxxxxxxxx]

https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=5965

           Summary: Wrong decode SCCP Unitdata message
           Product: Wireshark
           Version: 1.4.6
          Platform: Other
        OS/Version: All
            Status: NEW
          Severity: Major
          Priority: Low
         Component: Wireshark
        AssignedTo: wireshark-bugs@xxxxxxxxxxxxx
        ReportedBy: evgenij.fokin@xxxxxxxxx


Created an attachment (id=6414)
 --> (https://bugs.wireshark.org/bugzilla/attachment.cgi?id=6414)
SCCP UDT

Build Information:
Builded from wireshark-1.4.6.tar.bz2
The Wireshark package has been configured with the following options.
                    Build wireshark : yes
                       Build tshark : yes
                     Build capinfos : yes
                      Build editcap : yes
                      Build dumpcap : yes
                     Build mergecap : yes
                    Build text2pcap : yes
                      Build idl2wrs : yes
                      Build randpkt : yes
                       Build dftest : yes
                     Build rawshark : yes

  Install dumpcap with capabilities : no
             Install dumpcap setuid : no
                  Use dumpcap group : (none)
                        Use plugins : yes
                    Use lua library : no
                 Use python binding : no
                   Build rtp_player : no
                        Use threads : no
             Build profile binaries : no
                   Use pcap library : yes
                   Use zlib library : yes
                   Use pcre library : no (using GRegex instead)
               Use kerberos library : yes (MIT)
                 Use c-ares library : no
               Use GNU ADNS library : no
                Use SMI MIB library : no
             Use GNU crypto library : yes
             Use SSL crypto library : no
           Use IPv6 name resolution : yes
                 Use gnutls library : yes
     Use POSIX capabilities library : no
                  Use GeoIP library : no
--
Please look at "Pointer to first Mandatory Variable parameter". The address
0x63, the value 0x03.

Q.713 page5 says:
Coding of the pointers
The pointer value (in binary) gives the number of octets between the most
significant octet of the pointer itself (included) and the first octet (not
included) of the parameter associated with that pointer2...

It's mean than the first Mandatory Variable parameter starts from the address
0x66 the value 0x0d. But the wireshark decodes the first Mandatory Variable
parameter from address 0x67 the value 0x11. Address 0x66 is ignored.

Here is print of the package:
Frame 1: 180 bytes on wire (1440 bits), 180 bytes captured (1440 bits)
Linux cooked capture
Internet Protocol, Src: 192.168.17.71 (192.168.17.71), Dst: 192.168.17.71
(192.168.17.71)
Stream Control Transmission Protocol, Src Port: 2906 (2906), Dst Port: m3ua
(2905)
MTP 3 User Adaptation Layer
Signalling Connection Control Part
    Message Type: Unitdata (0x09)
    .... 0000 = Class: 0x00
    0000 .... = Message handling: No special options (0x00)
    Pointer to first Mandatory Variable parameter: 3
    Pointer to second Mandatory Variable parameter: 16
    Pointer to third Mandatory Variable parameter: 23
    Called Party address (13 bytes)
        Address Indicator
        ..00 0000 0001 1101 = PC: 29
        Global Title 0x4 (10 bytes)
    Calling Party address (7 bytes)
Data (53 bytes)

0000  08 85 b0 b3 b8 22 9e bf e8 42 47 b3 b0 60 ab b3   ....."...BG..`..
0010  70 4a 91 b3 d8 22 9e bf 3b 4d 65 73 73 61 67 65   pJ..."..;Message
0020  20 66 72 6f 6d 20 35 34 30 50 63 20 74 6f 20 35    from 540Pc to 5
0030  34 31 50 43 20                                    41PC

-- 
Configure bugmail: https://bugs.wireshark.org/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.