Wireshark-bugs: [Wireshark-bugs] [Bug 5546] Got error "Malformed Packets" on decoding SCTP init

Date: Tue, 4 Jan 2011 19:42:34 -0800 (PST)
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=5546

--- Comment #4 from Jeff Morriss <jeff.morriss.ws@xxxxxxxxx> 2011-01-04 19:42:33 PST ---
Rev 35368 allows the SCTP dissector to go even further, decoding parameters
until it runs out of data.  Now it says this about that first packet:

Stream Control Transmission Protocol, Src Port: 34119 (34119), Dst Port: 20000
(20000)
    Source port: 34119
    Destination port: 20000
    Verification tag: 0x00000000
    Checksum: 0x2dd0b7fc (not verified)
    INIT chunk (Outbound streams: 5, inbound streams: 5)
        Chunk type: INIT (1)
            0... .... = Bit: Stop processing of the packet
            .0.. .... = Bit: Do not report
        Chunk flags: 0x00
        Chunk length: 108
            [Expert Info (Error/Malformed): Chunk length (108) is longer than
remaining data (100) in the packet]
                [Message: Chunk length (108) is longer than remaining data
(100) in the packet]
                [Severity level: Error]
                [Group: Malformed]
        Initiate tag: 0x9f25ef61
        Advertised receiver window credit (a_rwnd): 2097152
        Number of outbound streams: 5
        Number of inbound streams: 5
        Initial TSN: 2271736697
        IPv4 address parameter (Address: 192.168.216.254)
            Parameter type: IPv4 address (0x0005)
                0... .... .... .... = Bit: Stop processing of chunk
                .0.. .... .... .... = Bit: Do not report
            Parameter length: 8
            IP Version 4 address: 192.168.216.254 (192.168.216.254)
        IPv4 address parameter (Address: 10.102.0.1)
            Parameter type: IPv4 address (0x0005)
                0... .... .... .... = Bit: Stop processing of chunk
                .0.. .... .... .... = Bit: Do not report
            Parameter length: 8
            IP Version 4 address: 10.102.0.1 (10.102.0.1)
        IPv4 address parameter (Address: 10.10.11.199)
            Parameter type: IPv4 address (0x0005)
                0... .... .... .... = Bit: Stop processing of chunk
                .0.. .... .... .... = Bit: Do not report
            Parameter length: 8
            IP Version 4 address: 10.10.11.199 (10.10.11.199)
        IPv4 address parameter (Address: 10.105.0.1)
            Parameter type: IPv4 address (0x0005)
                0... .... .... .... = Bit: Stop processing of chunk
                .0.. .... .... .... = Bit: Do not report
            Parameter length: 8
            IP Version 4 address: 10.105.0.1 (10.105.0.1)
        IPv4 address parameter (Address: 192.168.63.1)
            Parameter type: IPv4 address (0x0005)
                0... .... .... .... = Bit: Stop processing of chunk
                .0.. .... .... .... = Bit: Do not report
            Parameter length: 8
            IP Version 4 address: 192.168.63.1 (192.168.63.1)
        IPv4 address parameter (Address: 172.16.0.1)
            Parameter type: IPv4 address (0x0005)
                0... .... .... .... = Bit: Stop processing of chunk
                .0.. .... .... .... = Bit: Do not report
            Parameter length: 8
            IP Version 4 address: 172.16.0.1 (172.16.0.1)
        IPv4 address parameter (Address: 10.0.1.202)
            Parameter type: IPv4 address (0x0005)
                0... .... .... .... = Bit: Stop processing of chunk
                .0.. .... .... .... = Bit: Do not report
            Parameter length: 8
            IP Version 4 address: 10.0.1.202 (10.0.1.202)
        Supported address types parameter (Supported types: IPv4)
            Parameter type: Supported address types (0x000c)
                0... .... .... .... = Bit: Stop processing of chunk
                .0.. .... .... .... = Bit: Do not report
            Parameter length: 6
            Supported address type: IPv4 address (5)
            Parameter padding: 0000
        ECN parameter
            Parameter type: ECN (0x8000)
                1... .... .... .... = Bit: Skip parameter and continue
processing of the chunk
                .0.. .... .... .... = Bit: Do not report
            Parameter length: 4
        Supported Extensions parameter (Supported types: ASCONF, ASCONF_ACK)
            Parameter type: Supported Extensions (0x8008)
                1... .... .... .... = Bit: Skip parameter and continue
processing of the chunk
                .0.. .... .... .... = Bit: Do not report
            Parameter length: 6
            Supported chunk type: ASCONF (193)
            Supported chunk type: ASCONF_ACK (128)
            Parameter padding: 0000
        Forward TSN supported parameter
            Parameter type: Forward TSN supported (0xc000)
                1... .... .... .... = Bit: Skip parameter and continue
processing of the chunk
                .1.. .... .... .... = Bit: Do report
            Parameter length: 4
[Malformed Packet: SCTP]
    [Expert Info (Error/Malformed): Malformed Packet (Exception occurred)]
        [Message: Malformed Packet (Exception occurred)]
        [Severity level: Error]
        [Group: Malformed]

-- 
Configure bugmail: https://bugs.wireshark.org/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.