[bugzilla-daemon@xxxxxxxxxxxxx]

https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=4709

           Summary: UCP - only 1st msg decoded if there're more msgs in 1
                    packet
           Product: Wireshark
           Version: 1.2.7
          Platform: Other
        OS/Version: other
            Status: NEW
          Severity: Minor
          Priority: Low
         Component: Wireshark
        AssignedTo: wireshark-bugs@xxxxxxxxxxxxx
        ReportedBy: jarekchr@xxxxxxxxx


Created an attachment (id=4568)
 --> (https://bugs.wireshark.org/bugzilla/attachment.cgi?id=4568)
ucp session capture

Build Information:
Version 1.2.7 (SVN Rev 32341)
--
Hi,

I've observed this problem initially on 0.99.5 Wireshark version - upgrade to
1.2.7 didn't solve it.
In UCP protocol in Submit Short Message operation there can be more than 1
messages in 1 packet.
In such case Wireshar is displaying only 1st message.

Please see attached pcap file and take a look on packets: 6 and 33.
You can also observe that SMSC has accepted and responded correctly for all
messages that were inside those packets.

Regards,
Jarek

-- 
Configure bugmail: https://bugs.wireshark.org/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.