https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=3469
--- Comment #5 from Sake <sake@xxxxxxxxxx> 2009-05-25 10:32:28 PDT ---
(In reply to comment #4)
> (In reply to comment #3)
>
> What kind of ADSL config are you using?
> It's bridged mode (without PPP):
> rgracioli@homeoffice-> get config | in adsl
> set interface adsl2/0 phy operating-mode auto
> set interface "adsl2/0" pvc 0 34 mux llc protocol bridged qos ubr zone
> "Untrust"
> set interface adsl2/0 ip x.x.x.x
> set interface adsl2/0 route
> set interface adsl2/0 dhcp client enable
OK, that explains :-)
So, snoop output will have a Linklayer type of either ethernet (bridged mode)
or PPP (PPPoA or PPPoE mode). Are there any other Linklayer types possible? If
not, I will write some heuristics code that looks at the packet data to
determine what LinkLayer type to use for each frame.
> > I wrote and tested the NetScreen snoop code against a NS-5GT-ADSL with a PPPoA
> > config, which uses PPP as link layer for the ADSL interface.
>
> Thanks for the reply, I work for Juniper in customer support (JTAC) and I
> appreciate the effort to support decoding of snoop output!
Hi Rafael, we have had some cases together (I work for ion-ip). Actually I
think you were the one introducing me to snoop on the NetScreen in one of our
cases. Glad to be able to contribute back this way ;-) Cheers, Sake
--
Configure bugmail: https://bugs.wireshark.org/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.