Wireshark-announce: [Wireshark-announce] Wireshark 3.2.0rc2 is now available

From: Wireshark announcements <wireshark-announce@xxxxxxxxxxxxx>
Date: Wed, 11 Dec 2019 14:02:26 -0800
I'm proud to announce the release of Wireshark 3.2.0rc2.


 This is the second release candidate for Wireshark 3.2.

 What is Wireshark?

  Wireshark is the world’s most popular network protocol analyzer. It is
  used for troubleshooting, analysis, development and education.

 What’s New

  This is the last release branch with official support for Windows 7
  and Windows Server 2008 R2.

  Many improvements have been made. See the “New and Updated Features”
  section below for more details.

  New and Updated Features

   The following features are new (or have been significantly updated)
   since version 3.2.0rc1:

     • Nothing of note.

   The following features are new (or have been significantly updated)
   since version 3.1.1:

     • Miscellaneous UI fixes and updates.

     • The macOS installer now ships with Qt 5.12.6. It previously
       shipped with Qt 5.12.5.

   The following features are new (or have been significantly updated)
   since version 3.1.0:

     • Automatic updates are supported on macOS.

     • You can now select multiple packets in the packet list at the
       same time

     • They can be exported as Text by “Ctrl+C” or “Cmd+C” and the
       corresponding menu in “Edit › Copy › As …​”

     • They can be marked/unmarked or ignored/unignored at the same time

     • They can be exported and printed using the corresponding menu
       entries “File › Export Specified Packets”, “File › Export Packet
       Dissections” and “File › Print”

   You can now follow HTTP/2 and QUIC streams.

   You can once again mark and unmark packets using the middle mouse
   button. This feature went missing around 2009 or so.

   The Windows packages are now built using Microsoft Visual Studio
   2019.

   IOGraph automatically adds a graph for the selected display filter if
   no previous graph exists

   Action buttons for the display filter bar may be aligned left via the
   context menu

     • The "Expression…​" toolbar entry has been moved to "Analyze ›
       Display filter Expression …​" as well as to the context menu of
       the display filter toolbar

   Allow extcaps to be loaded from the personal configuration directory

   The Wireshark 3.1.0 Windows installers ship with Qt 5.12.6. Previous
   installers shipped with Qt 5.12.4.

   The following features are new (or have been significantly updated)
   since version 3.0.0:

     • You can drag and drop a field to a column header to create a
       column for that field, or to the display filter input to create a
       display filter. If a display filter is applied, the new filter
       can be added using the same rules as “Apply Filter”

     • You can drag and drop a column entry to the display filter to
       create a filter for it.

     • You can import profiles from a .zip archive or an existing
       directory.

     • Dark mode support on macOS and dark theme support on other
       platforms has been improved.

     • Brotli decompression support in HTTP/HTTP2 (requires the brotli
       library).

     • The build system now checks for a SpeexDSP system library
       installation. The bundled Speex resampler code is still provided
       as a fallback.

     • WireGuard decryption can now be enabled through keys embedded in
       a pcapng in addition to the existing key log preference (Bug
       15571[1]).

     • A new tap for extracting credentials from the capture file has
       been added. It can be accessed through the -z credentials option
       in tshark or from the “Tools › Credentials” menu in Wireshark.

     • Editcap can now split files on floating point intervals.

     • Windows .msi packages are now signed using SHA-2[2]. .exe
       installers are still dual-signed using SHA-1 and SHA-2.

     • The “Enabled Protocols” Dialog now only enables, disables and
       inverts protocols based on the set filter selection. The protocol
       type (standard or heuristic) may also be choosen as a filter
       value.

     • Save RTP stream to .au supports any codec with 8000 Hz rate
       supported by Wireshark (shown in RTP player). If save of audio is
       not possible (unsupported codec or rate), silence of same length
       is saved and warning is shown.

     • The “Analyze › Apply as Filter” and “Analyze › Prepare a Filter”
       packet list and detail popup menus now show a preview of their
       respective filters.

     • Protobuf files (*.proto) can now be configured to enable more
       precise parsing of serialized Protobuf data (such as gRPC).

     • HTTP2 support streaming mode reassembly. To use this feature,
       subdissectors can register itself to "streaming_content_type"
       dissector table and return pinfo→desegment_len and
       pinfo→desegment_offset to tell HTTP2 when to start and how many
       additional bytes requires when next called.

     • The message of stream gRPC method can now be parsed with
       supporting of HTTP2 streaming mode reassembly feature.

     • The Wireshark 3.1.0 Windows installers ship with Qt 5.12.4.
       Previous installers shipped with Qt 5.12.1.

  New Protocol Support

   3GPP BICC MST (BICC-MST), 3GPP log packet (LOG3GPP), 3GPP/GSM Cell
   Broadcast Service Protocol (cbsp), Asynchronous Management Protocol
   (AMP), Bluetooth Mesh Beacon, Bluetooth Mesh PB-ADV, Bluetooth Mesh
   Provisioning PDU, Bluetooth Mesh Proxy, CableLabs Layer-3 Protocol
   IEEE EtherType 0xb4e3 (CL3), DCOM IProvideClassInfo, DCOM ITypeInfo,
   Diagnostic Log and Trace (DLT), Distributed Replicated Block Device
   (DRBD), Dual Channel Wi-Fi (CL3DCW), EBHSCR Protocol (EBHSCR), EERO
   Protocol (EERO), evolved Common Public Radio Interface (eCPRI), File
   Server Remote VSS Protocol (FSRVP), FTDI FT USB Bridging Devices
   (FTDI FT), Graylog Extended Log Format over UDP (GELF), GSM/3GPP CBSP
   (Cell Broadcast Service Protocol), ITS message - CAMv1, ITS message -
   DENMv1, Linux net_dm (network drop monitor) protocol, MIDI System
   Exclusive DigiTech (SYSEX DigiTech), Network Controller Sideband
   Interface (NCSI), NR Positioning Protocol A (NRPPa) TS 38.455, NVM
   Express over Fabrics for TCP (nvme-tcp), OsmoTRX Protocol (GSM
   Transceiver control and data), Scalable service-Oriented MiddlewarE
   over IP (SOME/IP), USB 2.0 Link Layer (USBLL), and Wi-Fi Neighbour
   Awareness Networking (NAN)

  Updated Protocol Support

   Too many protocols have been updated to list here.

  New and Updated Capture File Support

   3gpp phone, Android Logcat Text, Ascend, Busmaster log file, Candump,
   Endace ERF, NetScaler, pcapng, and Savvius *Peek

 Getting Wireshark

  Wireshark source code and installation packages are available from
  https://www.wireshark.org/download.html[3].

  Vendor-supplied Packages

   Most Linux and Unix vendors supply their own Wireshark packages. You
   can usually install or upgrade Wireshark using the package management
   system specific to that platform. A list of third-party packages can
   be found on the download page[4] on the Wireshark web site.

 File Locations

  Wireshark and TShark look in several different locations for
  preference files, plugins, SNMP MIBS, and RADIUS dictionaries. These
  locations vary from platform to platform. You can use About→Folders to
  find the default locations on your system.

 Getting Help

  The User’s Guide, manual pages and various other documentation can be
  found at https://www.wireshark.org/docs/[5]

  Community support is available on Wireshark’s Q&A site[6] and on the
  wireshark-users mailing list. Subscription information and archives
  for all of Wireshark’s mailing lists can be found on the web site[7].

  Bugs and feature requests can be reported on the bug tracker[8].

  Official Wireshark training and certification are available from
  Wireshark University[9].

 Frequently Asked Questions

  A complete FAQ is available on the Wireshark web site[10].

  Last updated 2019-12-11 20:23:10 UTC

 References

   1. https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=15571
   2. https://support.microsoft.com/en-us/help/4472027/2019-sha-2-code-s
  igning-support-requirement-for-windows-and-wsus
   3. https://www.wireshark.org/download.html
   4. https://www.wireshark.org/download.html#thirdparty
   5. https://www.wireshark.org/docs/
   6. https://ask.wireshark.org/
   7. https://www.wireshark.org/lists/
   8. https://bugs.wireshark.org/
   9. https://www.wiresharktraining.com/
  10. https://www.wireshark.org/faq.html


Digests

wireshark-3.2.0rc2.tar.xz: 31454312 bytes
SHA256(wireshark-3.2.0rc2.tar.xz)=fc9f39da16a5708dff76bd0df78b244699f4a1f4a13ceb75777000e87ee57e46
RIPEMD160(wireshark-3.2.0rc2.tar.xz)=cba58cfb02de7abb7d2b6067a83a590e1431b7f0
SHA1(wireshark-3.2.0rc2.tar.xz)=cfd217336c613ef3376588da412ecc6acfca164e

Wireshark-win64-3.2.0rc2.exe: 69031872 bytes
SHA256(Wireshark-win64-3.2.0rc2.exe)=cf41ea689f9cbb9cf66166e5a2287aafef56d0161be642834f44620365ed085e
RIPEMD160(Wireshark-win64-3.2.0rc2.exe)=7498d1115e1a8a08559f8d7d6f0d623a932fc1bb
SHA1(Wireshark-win64-3.2.0rc2.exe)=5eced01a12390b58bfb8bf85203f4629bab6be36

Wireshark-win32-3.2.0rc2.exe: 63814144 bytes
SHA256(Wireshark-win32-3.2.0rc2.exe)=7f979ce1f05823e1068bfd7ccc7deba9b65ad46b774a875b0e7f25b3a19c0169
RIPEMD160(Wireshark-win32-3.2.0rc2.exe)=006de7e13a3a3e534eda51965a851b50785e0ca4
SHA1(Wireshark-win32-3.2.0rc2.exe)=871c2e68d3df493a160cc1d1b807b07c6cb32976

Wireshark-win64-3.2.0rc2.msi: 48218112 bytes
SHA256(Wireshark-win64-3.2.0rc2.msi)=dd35ad5470ef9fb233e9fefb5d9ea55e366052f9a0a7c8a8668183f1a2184a63
RIPEMD160(Wireshark-win64-3.2.0rc2.msi)=31743d6db25058c09bd1fd4ae4726d417cea0396
SHA1(Wireshark-win64-3.2.0rc2.msi)=b72870a936935c70fe7558cf7abeaec09ce21ba1

Wireshark-win32-3.2.0rc2.msi: 42913792 bytes
SHA256(Wireshark-win32-3.2.0rc2.msi)=87395c9aa1e16d45ec3af7e2f8e98f5ec91ce834f0d489a66f6656f0b4783a2f
RIPEMD160(Wireshark-win32-3.2.0rc2.msi)=d37f21ee7d4e26112885ba5522921f2a3b4d12c8
SHA1(Wireshark-win32-3.2.0rc2.msi)=99999020c98b619ada0a10f77dfbac18a23ebc64

WiresharkPortable_3.2.0rc2.paf.exe: 36514584 bytes
SHA256(WiresharkPortable_3.2.0rc2.paf.exe)=682432a14b3630a08516a3c9a2363dd605355324003247cfe71f859365797b64
RIPEMD160(WiresharkPortable_3.2.0rc2.paf.exe)=4bf7bfc8150cc3168a5a4d37ba10e34b4faa7328
SHA1(WiresharkPortable_3.2.0rc2.paf.exe)=c1946d592ddb6af2ec86f321ff3a834d5d538eea

Wireshark 3.2.0rc2 Intel 64.dmg: 96363813 bytes
SHA256(Wireshark 3.2.0rc2 Intel
64.dmg)=f3aa6aea51b85a73f0c240a6cc5eeb542038b09b24a8c7dad6b8a2b419190985
RIPEMD160(Wireshark 3.2.0rc2 Intel
64.dmg)=c664eccdef2c9185e4857bb55e24431559859775
SHA1(Wireshark 3.2.0rc2 Intel 64.dmg)=edab72aba192df513bfcfa8db616ba779fdf3621

You can validate these hashes using the following commands (among others):

    Windows: certutil -hashfile Wireshark-win64-x.y.z.exe SHA256
    Linux (GNU Coreutils): sha256sum wireshark-x.y.z.tar.xz
    macOS: shasum -a 256 "Wireshark x.y.z Intel 64.dmg"
    Other: openssl sha256 wireshark-x.y.z.tar.xz

Attachment: signature.asc
Description: OpenPGP digital signature