Ethereal-users: Re: [Ethereal-users] Decode an error message for a vendor specific radius attrib

Note: This archive is from the project's previous web site, ethereal.com. This list is no longer active.

Date Prev · Date Next · Thread Prev · Thread Next
Date Index · Thread Index · Other Months · All Mailing Lists
From: Andreas Fink <andreas@xxxxxxxx>
Date: Tue, 20 Jun 2006 08:32:04 +0200
seems to contain the ASCII string  \x10 56;10.60.60.0:0;banking.

0x10 could be the length until the second ";" or some type identifier


On 20.06.2006, at 08:24, Deepa Gandhavalli Ramaniah -X (dgandhav - HCL at Cisco) wrote:

 

Hi all,

 

Could anyone help me in decoding the ERROR_MESSAGE obtained in the Cisco specific radius attribute (Command Code) shown below –

 

Cisco: Command Code = ERROR_MESSAGE:1035363b31302e36302e36302e303a303b62616e6b696e67

 

Thanks in advance,

Deepa

_______________________________________________
Ethereal-users mailing list


Andreas Fink

Fink Consulting GmbH


---------------------------------------------------------------

Tel: +41-61-6666332 Fax: +41-61-6666331  Mobile: +41-79-2457333

Address: Clarastrasse 3, 4058 Basel, Switzerland

E-Mail:  afink@xxxxxxxxxxxxxxxxxx

Homepage: http://www.finkconsulting.com

---------------------------------------------------------------


ICQ: 101946485 MSN: msn1@xxxxxx AIM: smsrelay Skype: andreasfink

Yahoo: finkconsulting SMS: +41792457333

PGP9: 0714 DF2B A189 A760 6201  5CBD D040 3E71 4DAF 68BB


_______________________________________________
Ethereal-users mailing list
Ethereal-users@xxxxxxxxxxxx
http://www.ethereal.com/mailman/listinfo/ethereal-users