Ethereal-users: Re: [Ethereal-users] How to see transport port in every output line?

Note: This archive is from the project's previous web site, ethereal.com. This list is no longer active.

Date Prev · Date Next · Thread Prev · Thread Next
Date Index · Thread Index · Other Months · All Mailing Lists
From: LEGO <luis.ontanon@xxxxxxxxx>
Date: Sun, 24 Jul 2005 04:03:01 +0200
you can either use tethereal's -V option to see the complete tree for
every packet
or
if you prefer the single line format you can try something like 

$ tethereal -zproto,colinfo,tcp.srcport,tcp.srcport
-zproto,colinfo,tcp.dstport,tcp.dstport  'tcp.srcport || tcp.dstport'


On 7/24/05, Abraham WEI <abraham.wei@xxxxxxxxx> wrote:
> I run tethereal as
> # tethereal host 192.168.199.2
> 
> and get the following output:
> 
> 09:34:35.046762 192.168.199.2 -> 192.168.199.186 FTP Response: 431
> Local error code 2 was returned from tls_init()
> 
> in which I cannot see the port numbers.
> 
> What can I do if I want to see the port numbers printed in each line
> of the output?
> 
> Thanks.
>                                                    Abe
> 
> _______________________________________________
> Ethereal-users mailing list
> Ethereal-users@xxxxxxxxxxxx
> http://www.ethereal.com/mailman/listinfo/ethereal-users
> 


-- 
This information is top security. When you have read it, destroy yourself.
-- Marshall McLuhan