Ethereal-users: Re: [Ethereal-users] SEQ/ACK analysis, The RTT to ACK the segment was 'very larg

Note: This archive is from the project's previous web site, ethereal.com. This list is no longer active.

Date Prev · Date Next · Thread Prev · Thread Next
Date Index · Thread Index · Other Months · All Mailing Lists
From: ronnie sahlberg <ronniesahlberg@xxxxxxxxx>
Date: Mon, 11 Oct 2004 18:23:22 +1000
i have checked in a patch for this problem.



On Sat, 9 Oct 2004 18:16:04 +1000, Ciaran Finnegan  wrote:
> 
> 
> 
> Hi,
> 
>  
> 
> I've got three traces of a telnet session (either side of a wireless bridge
> link and on the other side of a NAT router). 
> 
>  
> 
> When I run a filter tcp.analysis.ack_rtt>1 on each of the traces I see
> telnet data packets in both directions (some marked as [TCP out-of-order])
> where the SEQ/ACK Analysis reports the RTT to ACK the segment was a number
> that is consistently 10971xxxxx.xx seconds. The traces were run over a
> period of four hours.
> 
>  
> 
> If I were more knowledgeable would this be making me emit satisfied little
> 'ahaa' noises?
> 
>  
> 
> Ta,
> 
>  
> 
> Ciaran. 
> _______________________________________________
> Ethereal-users mailing list
> Ethereal-users@xxxxxxxxxxxx
> http://www.ethereal.com/mailman/listinfo/ethereal-users
> 
> 
>