Title: Message
Oliver,
Thanks for your
prompt answer.
I did what you
mentioned but did not work. In fact when I applied the 1st display filter I was
able to see only frame #26.
Regards,
Edson
Hello Edson,
This is currently not possible
"automatically" but you can do it this way:
1. Apply the following display
filter:
mmse and tcp
2. Note all packets that match: 24, 26
3. Now
create the following display filter:
(mmse and tcp) or tcp.reassembled_in ==
24 or tcp.reassembled_in ==
26
4. Prontinho :)
Should you have an
MMSE-over-WSP-over-UDP capture, then you replace "tcp"
with "udp" in the
previous explanation.
Hope this
helps!
Regards,
Olivier
-----Original Message-----
From:
Santos Edson-WES051
I'm using Ethereal to decode some MMS messages
and I'm able to decode the
MMSE accordingly.
Refer to the file
attached, frame #22 is a HTTP Post (sending the MMS
Message) and frame #24 is
the MMS message itself. Is there any way to decode
frame #24 as MMSE
considering the Content-Type/Content-Legth headers from
frame
#22?
Please, could some help me on that?
My Best
Regards,
Edson
+55 19 3847-6187