[Michael Tuexen <Michael.Tuexen@xxxxxxxxxxxxxxxxx>]

What happens if you run
./autogen.sh
and then
./configure
and
make
again?

Best regards
Michael

On May 18, 2004, at 7:44 AM, Larry Jaffe wrote:

> Hi all,
>
>  I am running into this problem when making 10.4 on OpenBSD 3.5.  
> Configure seems to run OK but make fails.  The output from these 
> commands is appended below.  I am also appending the list of installed 
> packages which includes the version numbers for all the prerequisite 
> packages.
>
>  I also get the same errors compiling 10.3 both directly and via the 
> ports tree.
>
>  Anyone have any suggestions?  Oh, and I'm sorry for the long post.
>
>
>  Thanks in advance,
>
>  Larry
>
>  ------------------  pkg_info output
>
>
>  # pkg_info
>  ORBit2-2.8.3        high-performance CORBA Object Request Broker
>  arts-1.2.1          X11 toolkit, multimedia hub
>  aspell-0.50.4.1     spell checker designed to eventually replace 
> Ispell
>  atk-1.4.1           accessibility toolkit used by gtk+
>  autoconf-2.59       automatically configure source code on many Un*x 
> platforms
>  automake-1.4-p6p1   GNU Standards-compliant Makefile generator
>  bison-1.35p1        GNU parser generator
>  bzip2-1.0.2         block-sorting file compressor, unencumbered
>  cadaver-0.22.0      command-line WebDAV client
>  cdparanoia-3.a9.8   CDDA reading utility with extra data verification 
> features
>  cgichk-3.6          scans webservers for vulnerable CGI programs
>  cidr-2.3            RFC 1878 subnet calculator / helper
>  db-3.1.17p1         Berkeley DB package, revision 3
>  dsniff-2.3          sniffing tools for penetration testing
>  esound-0.2.28       sound library for Enlightenment
>  ettercap-0.6.b      multi-purpose sniffer/interceptor/logger
>  fragrouter-1.6      tool for testing network IDS implementations
>  fribidi-0.10.4      Library implementing the Unicode Bidirectional 
> Algorithm
>  gettext-0.10.40p1   GNU gettext
>  ghostscript-7.05p2  GNU PostScript interpreter
>  ghostscript-fonts-6.0 35 standard PostScript fonts with Adobe name 
> aliases
>  glib-1.2.10         useful routines for C programming
>  glib2-2.2.3         general-purpose utility library
>  gmake-3.80          GNU make
>  gnome-mime-data-2.4.1 MIME and Application database for GNOME
>  gtk+-1.2.10p1       General Toolkit for X11 GUI
>  gtk+2-2.2.4         multi-platform graphical toolkit
>  ifstat-1.0          tool to monitor interface bandwidth usage
>  imlib-1.9.14p2      image manipulation library for X11
>  jpeg-6b             IJG's JPEG compression utilities
>  kdeadmin-3.2.1      X11 toolkit, admin tools
>  kdebase-3.2.1       X11 toolkit, basic applications
>  kdegraphics-3.2.1   X11 toolkit, graphic applications
>  kdelibs-3.2.1       X11 toolkit, libraries
>  kdemultimedia-3.2.1 X11 toolkit, multimedia applications
>  kdenetwork-3.2.1    X11 toolkit, network applications
>  kdepim-3.2.1        KDE personal information applications
>  koffice-1.3         office suite for KDE
>  lcms-1.12           color management library
>  libIDL-0.8.3        IDL parsing library
>  libart-2.3.16       high-performance 2D graphics library
>  libaudiofile-0.2.5  SGI audiofile library clone
>  libbonobo-2.4.3     GNOME component and compound document system
>  libglade2-2.0.1     library for loading GLADE interface files at 
> runtime
>  libgsf-1.8.2        GNOME Structured File library
>  libiconv-1.9.1      character set conversion library
>  libmad-0.15.1b      high-quality MPEG audio decoder
>  libmng-1.0.5p1      Multiple-image Network Graphics (MNG) reference 
> library
>  libnet-1.0.2a       raw IP packet construction library
>  libogg-1.1          Ogg bitstream library
>  libtool-1.3.5p3     generic shared library support script
>  libungif-4.1.0b1    tools and library routines for working with GIF 
> images
>  libvorbis-1.0.1     audio compression codec library
>  libxml-2.6.5        XML parsing library
>  libxml1-1.8.17      XML parsing library for GNOME
>  libxslt-1.0.33      XSLT C Library for GNOME
>  mtr-0.54            Matt's traceroute - network diagnostic tool
>  nbaudit-1.0         NetBIOS Auditing Tool / Security Kit
>  nbtscan-1.5         NetBIOS name network scanner
>  nessus-2.0.9        network security scanner
>  netperf-2.2pl3      Network performance benchmark
>  netpipe-2.4         self-scaling network benchmark
>  netstrain-3.0       tool to measure TCP throughput
>  nmap-3.50           scan ports and fingerprint stack of network hosts
>  ntp-4.1.1c          network time protocol implementation
>  openldap-client-2.1.27 Open source LDAP software (client)
>  oproute-0.7p1       network performance measuring tool
>  pango-1.2.5         library for layout and rendering of text
>  pchar-1.4p1         Sandia Internet path characterization tool
>  pcre-4.5            perl-compatible regular expression library
>  pkgconfig-0.15.0    tool for managing library compile/link flags
>  png-1.2.5p2         library for manipulating PNG images
>  popt-1.7            getopt(3)-like library with a number of 
> enhancements
>  python-2.3.3        interpreted object-oriented programming language
>  qt3-base-2.3        include and docs for qt3
>  qt3-mt-2.3          C++ X11 GUI toolkit
>  samba-2.2.8a        SMB and CIFS client and server for UNIX
>  tcpreplay-1.0.1     resend network traffic saved by tcpdump
>  tiff-3.6.1          tools and library routines for working with TIFF 
> images
>  ucd-snmp-4.2.6      extendible SNMP implementation
>  unzip-5.50p2        extract, list & test files in a ZIP archive
>  whisker-2.1         stealthy webserver vulnerability scanner
>  wv2-0.2.1           library providing routines to access Microsoft 
> Word/Excel files
>  xanim-2.80.1p0      X11 animation player with support for lots of 
> formats
>  xmms-1.2.7          Multimedia player for the X Window System
>  #
>
>
>  ------------------- configure output
>
>
>  # ./configure
>  checking build system type... i386-unknown-openbsd3.5
>  checking host system type... i386-unknown-openbsd3.5
>  checking target system type... i386-unknown-openbsd3.5
>  checking for a BSD-compatible install... /usr/bin/install -c
>  checking whether build environment is sane... yes
>  checking for gawk... no
>  checking for mawk... no
>  checking for nawk... nawk
>  checking whether make sets $(MAKE)... yes
>  checking for gcc... gcc
>  checking for C compiler default output file name... a.out
>  checking whether the C compiler works... yes
>  checking whether we are cross compiling... no
>  checking for suffix of executables...
>  checking for suffix of object files... o
>  checking whether we are using the GNU C compiler... yes
>  checking whether gcc accepts -g... yes
>  checking for gcc option to accept ANSI C... none needed
>  checking for style of include used by make... GNU
>  checking dependency style of gcc... gcc
>  Checking how to run the C preprocessor... gcc -E
>  checking for ld used by GCC... /usr/bin/ld
>  checking if the linker (/usr/bin/ld) is GNU ld... yes
>  checking for /usr/bin/ld option to reload object files... -r
>  checking for BSD-compatible nm... /usr/bin/nm -B
>  checking for a sed that does not truncate output... /usr/bin/sed
>  checking whether ln -s works... yes
>  checking how to recognise dependent libraries... file_magic ELF 
> [0-9][0-9]*-bit [LM]SB shared object
>  checking command to parse /usr/bin/nm -B output... ok
>  checking for egrep... grep -E
>  checking for ANSI C header files... yes
>  checking for sys/types.h... yes
>  checking for sys/stat.h... yes
>  checking for stdlib.h... yes
>  checking for string.h... yes
>  checking for memory.h... yes
>  checking for strings.h... yes
>  checking for inttypes.h... yes
>  checking for stdint.h... no
>  checking for unistd.h... yes
>  checking dlfcn.h usability... yes
>  checking dlfcn.h presence... yes
>  checking for dlfcn.h... yes
>  checking for ranlib... ranlib
>  checking for strip... strip
>  checking for objdir... .libs
>  checking for gcc option to produce PIC... -fPIC
>  checking if gcc PIC flag -fPIC works... yes
>  checking if gcc static flag -static works... yes
>  checking if gcc supports -c -o file.o... yes
>  checking if gcc supports -c -o file.lo... yes
>  checking if gcc supports -fno-rtti -fno-exceptions... yes
>  checking whether the linker (/usr/bin/ld) supports shared 
> libraries... yes
>  checking how to hardcode library paths into programs... immediate
>  checking whether stripping libraries is possible... yes
>  checking dynamic linker characteristics... openbsd3.5 ld.so
>  checking if libtool supports shared libraries... yes
>  checking whether to build shared libraries... yes
>  checking whether to build static libraries... no
>  checking for shl_load... no
>  checking for shl_load in -ldld... no
>  checking for dlopen... yes
>  checking whether a program can dlopen itself... yes
>  checking whether a statically linked program can dlopen itself... 
> Wrong dl symbols!
>  no
>  checking whether -lc should be explicitly linked in... yes
>  creating libtool
>  checking for bison... bison -y
>  checking for flex... flex
>  checking for yywrap in -lfl... yes
>  checking lex output file root... lex.yy
>  checking whether yytext is a pointer... yes
>  checking for perl... /usr/bin/perl
>  checking for pod2man... /usr/bin/pod2man
>  checking for flex... /usr/bin/flex
>  checking for python... /usr/local/bin/python
>  checking for pkgproto... no
>  checking for pkgmk... no
>  checking for pkgtrans... no
>  checking for rpm... no
>  checking to see if we can add '-Wall -W' to CFLAGS... yes
>  checking for platform-specific compiler flags... none needed
>  checking whether to use /usr/local for headers and libraries... yes
>  checking for GNU sed as first sed in PATH... no
>  checking if profile builds must be generated... no
>  checking for gtk-config... /usr/local/bin/gtk-config
>  checking for GTK - version >= 1.2.0... yes
>  checking for glib-config... /usr/local/bin/glib-config
>  checking for GLIB - version >= 1.2.0... yes
>  checking whether GLib supports loadable modules... yes
>  checking for gethostbyname... yes
>  checking for connect... yes
>  checking whether to use libpcap for packet capture... yes
>  checking for extraneous pcap header directories... not found
>  checking pcap.h usability... yes
>  checking pcap.h presence... yes
>  checking for pcap.h... yes
>  checking for pcap_open_live in -lpcap... yes
>  checking whether pcap_version is defined by libpcap... yes
>  checking for pcap_findalldevs... yes
>  checking for pcap_lib_version... yes
>  checking for pcap_open_dead... yes
>  checking for pcap_datalink_val_to_name... yes
>  checking for pcap_datalink_name_to_val... yes
>  checking for pcap_list_datalinks... yes
>  checking for pcap_set_datalink... yes
>  checking whether to use zlib for reading compressed capture files... 
> yes
>  checking zlib.h usability... yes
>  checking zlib.h presence... yes
>  checking for zlib.h... yes
>  checking for gzgets in -lz... yes
>  checking for gzgets missing when linking with X11... no
>  checking whether to use libpcre for regular expressions in 
> dfilters... yes
>  checking pcre.h usability... yes
>  checking pcre.h presence... yes
>  checking for pcre.h... yes
>  checking for pcre_compile in -lpcre... yes
>  checking whether to enable ipv6 name resolution if available... yes
>  checking ipv6 stack type... "kame, inet6"
>  checking whether to install ethereal setuid... no
>  checking for ANSI C header files... (cached) yes
>  checking direct.h usability... no
>  checking direct.h presence... no
>  checking for direct.h... no
>  checking dirent.h usability... yes
>  checking dirent.h presence... yes
>  checking for dirent.h... yes
>  checking fcntl.h usability... yes
>  checking fcntl.h presence... yes
>  checking for fcntl.h... yes
>  checking netdb.h usability... yes
>  checking netdb.h presence... yes
>  checking for netdb.h... yes
>  checking stdarg.h usability... yes
>  checking stdarg.h presence... yes
>  checking for stdarg.h... yes
>  checking stddef.h usability... yes
>  checking stddef.h presence... yes
>  checking for stddef.h... yes
>  checking for unistd.h... (cached) yes
>  checking sys/ioctl.h usability... yes
>  checking sys/ioctl.h presence... yes
>  checking for sys/ioctl.h... yes
>  checking sys/param.h usability... yes
>  checking sys/param.h presence... yes
>  checking for sys/param.h... yes
>  checking sys/socket.h usability... yes
>  checking sys/socket.h presence... yes
>  checking for sys/socket.h... yes
>  checking sys/sockio.h usability... yes
>  checking sys/sockio.h presence... yes
>  checking for sys/sockio.h... yes
>  checking for sys/stat.h... (cached) yes
>  checking sys/time.h usability... yes
>  checking sys/time.h presence... yes
>  checking for sys/time.h... yes
>  checking for sys/types.h... (cached) yes
>  checking sys/utsname.h usability... yes
>  checking sys/utsname.h presence... yes
>  checking for sys/utsname.h... yes
>  checking sys/wait.h usability... yes
>  checking sys/wait.h presence... yes
>  checking for sys/wait.h... yes
>  checking netinet/in.h usability... yes
>  checking netinet/in.h presence... yes
>  checking for netinet/in.h... yes
>  checking arpa/inet.h usability... yes
>  checking arpa/inet.h presence... yes
>  checking for arpa/inet.h... yes
>  checking arpa/nameser.h usability... yes
>  checking arpa/nameser.h presence... yes
>  checking for arpa/nameser.h... yes
>  checking iconv.h usability... yes
>  checking iconv.h presence... yes
>  checking for iconv.h... yes
>  checking whether to use SSL library if available... yes
>  checking for EVP_md5 in -lcrypto... yes
>  checking whether to use NET-SNMP library if available... yes
>  checking for net-snmp-config... no
>  checking whether to use UCD SNMP library if available... yes
>  checking ucd-snmp/ucd-snmp-config.h usability... yes
>  checking ucd-snmp/ucd-snmp-config.h presence... yes
>  checking for ucd-snmp/ucd-snmp-config.h... yes
>  checking for sprint_realloc_objid in -lsnmp... no
>  checking for sprint_realloc_objid in -lsnmp... no
>  checking for sprint_realloc_objid in -lsnmp... no
>  checking whether to use kerberos/heimdal... no
>  checking whether to use the GNU ADNS library if available... yes
>  checking for adns_init in -ladns... no
>  checking for sa_len in struct sockaddr... yes
>  checking whether byte ordering is bigendian... no
>  checking whether gcc needs -traditional... no
>  checking for snprintf... yes
>  checking for strerror... yes
>  checking for strcasecmp... yes
>  checking for strncasecmp... yes
>  checking for mkstemp... yes
>  checking for inet_aton... yes
>  checking for library containing inet_pton... none required
>  checking for broken inet_pton... ok
>  checking for library containing inet_ntop... none required
>  checking for inet_ntop prototype... yes
>  checking for strptime... yes
>  checking for getprotobynumber... yes
>  checking for gethostbyname2... yes
>  configure: creating ./config.status
>  config.status: creating Makefile
>  config.status: creating doc/Makefile
>  config.status: creating epan/Makefile
>  config.status: creating epan/dfilter/Makefile
>  config.status: creating epan/ftypes/Makefile
>  config.status: creating gtk/Makefile
>  config.status: creating help/Makefile
>  config.status: creating packaging/Makefile
>  config.status: creating packaging/nsis/Makefile
>  config.status: creating packaging/rpm/Makefile
>  config.status: creating packaging/rpm/SPECS/Makefile
>  config.status: creating packaging/rpm/SPECS/ethereal.spec
>  config.status: creating packaging/svr4/Makefile
>  config.status: creating packaging/svr4/checkinstall
>  config.status: creating packaging/svr4/pkginfo
>  config.status: creating plugins/Makefile
>  config.status: creating plugins/acn/Makefile
>  config.status: creating plugins/artnet/Makefile
>  config.status: creating plugins/asn1/Makefile
>  config.status: creating plugins/ciscosm/Makefile
>  config.status: creating plugins/docsis/Makefile
>  config.status: creating plugins/enttec/Makefile
>  config.status: creating plugins/giop/Makefile
>  config.status: creating plugins/gryphon/Makefile
>  config.status: creating plugins/irda/Makefile
>  config.status: creating plugins/lwres/Makefile
>  config.status: creating plugins/megaco/Makefile
>  config.status: creating plugins/mgcp/Makefile
>  config.status: creating plugins/pcli/Makefile
>  config.status: creating plugins/rdm/Makefile
>  config.status: creating plugins/rlm/Makefile
>  config.status: creating plugins/rtnet/Makefile
>  config.status: creating plugins/rudp/Makefile
>  config.status: creating plugins/v5ua/Makefile
>  config.status: creating tools/Makefile
>  config.status: creating tools/lemon/Makefile
>  config.status: creating config.h
>  config.status: config.h is unchanged
>  config.status: executing depfiles commands
>  configure: configuring in wiretap
>  configure: running /bin/sh './configure' --prefix=/usr/local  
> --cache-file=/dev/null --srcdir=.
>  checking build system type... i386-unknown-openbsd3.5
>  checking host system type... i386-unknown-openbsd3.5
>  checking target system type... i386-unknown-openbsd3.5
>  checking for a BSD-compatible install... /usr/bin/install -c
>  checking whether build environment is sane... yes
>  checking for gawk... no
>  checking for mawk... no
>  checking for nawk... nawk
>  checking whether make sets $(MAKE)... yes
>  checking for gcc... gcc
>  checking for C compiler default output file name... a.out
>  checking whether the C compiler works... yes
>  checking whether we are cross compiling... no
>  checking for suffix of executables...
>  checking for suffix of object files... o
>  checking whether we are using the GNU C compiler... yes
>  checking whether gcc accepts -g... yes
>  checking for gcc option to accept ANSI C... none needed
>  checking for style of include used by make... GNU
>  checking dependency style of gcc... gcc
>  checking how to run the C preprocessor... gcc -E
>  checking for bison... bison -y
>  checking for flex... flex
>  checking for yywrap in -lfl... yes
>  checking lex output file root... lex.yy
>  checking whether yytext is a pointer... yes
>  checking for ld used by GCC... /usr/bin/ld
>  checking if the linker (/usr/bin/ld) is GNU ld... yes
>  checking for /usr/bin/ld option to reload object files... -r
>  checking for BSD-compatible nm... /usr/bin/nm -B
>  checking for a sed that does not truncate output... /usr/bin/sed
>  checking whether ln -s works... yes
>  checking how to recognise dependent libraries... file_magic ELF 
> [0-9][0-9]*-bit [LM]SB shared object
>  checking command to parse /usr/bin/nm -B output... ok
>  checking for egrep... grep -E
>  checking for ANSI C header files... yes
>  checking for sys/types.h... yes
>  checking for sys/stat.h... yes
>  checking for stdlib.h... yes
>  checking for string.h... yes
>  checking for memory.h... yes
>  checking for strings.h... yes
>  checking for inttypes.h... yes
>  checking for stdint.h... no
>  checking for unistd.h... yes
>  checking dlfcn.h usability... yes
>  checking dlfcn.h presence... yes
>  checking for dlfcn.h... yes
>  checking for ranlib... ranlib
>  checking for strip... strip
>  checking for objdir... .libs
>  checking for gcc option to produce PIC... -fPIC
>  checking if gcc PIC flag -fPIC works... yes
>  checking if gcc static flag -static works... yes
>  checking if gcc supports -c -o file.o... yes
>  checking if gcc supports -c -o file.lo... yes
>  checking if gcc supports -fno-rtti -fno-exceptions... yes
>  checking whether the linker (/usr/bin/ld) supports shared 
> libraries... yes
>  checking how to hardcode library paths into programs... immediate
>  checking whether stripping libraries is possible... yes
>  checking dynamic linker characteristics... openbsd3.5 ld.so
>  checking if libtool supports shared libraries... yes
>  checking whether to build shared libraries... yes
>  checking whether to build static libraries... no
>  checking whether -lc should be explicitly linked in... yes
>  creating libtool
>  checking for flex... /usr/bin/flex
>  checking to see if we can add '-Wall -W -Wcast-qual' to CFLAGS... yes
>  checking for platform-specific compiler flags... none needed
>  checking if profile builds must be generated... no
>  checking for glib-config... /usr/local/bin/glib-config
>  checking for GLIB - version >= 1.2.0... yes
>  checking whether to use /usr/local for headers and libraries... yes
>  checking for ANSI C header files... (cached) yes
>  checking sys/time.h usability... yes
>  checking sys/time.h presence... yes
>  checking for sys/time.h... yes
>  checking netinet/in.h usability... yes
>  checking netinet/in.h presence... yes
>  checking for netinet/in.h... yes
>  checking for unistd.h... (cached) yes
>  checking fcntl.h usability... yes
>  checking fcntl.h presence... yes
>  checking for fcntl.h... yes
>  checking for sys/stat.h... (cached) yes
>  checking for sys/types.h... (cached) yes
>  checking whether byte ordering is bigendian... no
>  checking for extraneous pcap header directories... found --  
> -I/usr/local/include added to CFLAGS
>  checking pcap.h usability... yes
>  checking pcap.h presence... yes
>  checking for pcap.h... yes
>  checking whether to use zlib for reading compressed capture files... 
> yes
>  checking zlib.h usability... yes
>  checking zlib.h presence... yes
>  checking for zlib.h... yes
>  checking for gzgets in -lz... yes
>  checking for gzgets missing when linking with X11... no
>  configure: creating ./config.status
>  config.status: creating Makefile
>  config.status: creating config.h
>  config.status: config.h is unchanged
>  config.status: executing depfiles commands
>
>  The Ethereal package has been configured with the following options.
>                      Build ethereal : yes
>                     Build tethereal : yes
>                       Build editcap : yes
>                      Build mergecap : yes
>                     Build text2pcap : yes
>                       Build idl2eth : yes
>                       Build randpkt : no
>                        Build dftest : no
>
>                      Install setuid : no
>                         Use plugins : yes
>                 Use GTK+ v2 library : no
>                    Use pcap library : yes
>                    Use zlib library : yes
>                    Use pcre library : yes
>                Use kerberos library : no
>                Use GNU ADNS library : no
>            Use IPv6 name resolution : yes
>       Use UCD SNMP/NET-SNMP library : no
>  #
>
>  ------------------- last few lines of make output
>
>  /bin/sh ./libtool --mode=link gcc  -DINET6 
> -D_U_="__attribute__((unused))" -Wall -W -g -O2 -I/usr/local/include 
> -I/usr/local/include/gtk-1.2 -I/usr/local/include/glib-1.2 
> -I/usr/X11R6/include   -L/usr/local/lib -L/usr/local/lib -o ethereal 
> -export-dynamic pcap-util-unix.o capture_stop_conditions.o  cfile.o 
> conditions.o disabled_protos.o  pcap-util.o range.o ringbuffer.o  
> timestats.o version_info.o alert_box.o  capture.o file.o filters.o  
> g711.o proto_hier_stats.o summary.o    gtk/libui.a    
>          wiretap/libwiretap.la   epan/libethereal.la     
> -lcrypto                "-dlopen" self  "-dlopen" plugins/acn/acn.la  
> "-dlopen" plugins/artnet/artnet.la  "-dlopen" plugins/asn1/asn1.la  
> "-dlopen" plugins/ciscosm/ciscosm.la  "-dlopen" 
> plugins/docsis/docsis.la  "-dlopen" plugins/enttec/enttec.la  
> "-dlopen" plugins/giop/cosnaming.la  "-dlopen" 
> plugins/giop/coseventcomm.la  "-dlopen" plugins/gryphon/gryphon.la  
> "-dlopen" plugins/irda/irda.la  "-dlopen" plugins/lwres/lwres.la  
> "-dlopen" plugins/megaco/megaco.la  "-dlopen" plugins/mgcp/mgcp.la  
> "-dlopen" plugins/pcli/pcli.la  "-dlopen" plugins/rdm/rdm.la  
> "-dlopen" plugins/rlm/rlm.la  "-dlopen" plugins/rtnet/rtnet.la  
> "-dlopen" plugins/rudp/rudp.la  "-dlopen" 
> plugins/v5ua/v5ua.la                   -lpcre                  -lpcap 
> -L/usr/local/lib -L/usr/X11R6/lib -lgtk -lgdk -Wl,-E -lgmodule -lglib 
> -lintl -liconv -lXi -lXext -lX11 -lm -lz
>  mkdir .libs
>  rm -f .libs/ethereal.nm .libs/ethereal.nmS .libs/ethereal.nmT
>  creating .libs/etherealS.c
>  (cd .libs && gcc -c -fno-builtin -fno-rtti -fno-exceptions 
> "etherealS.c")
>  rm -f .libs/etherealS.c .libs/ethereal.nm .libs/ethereal.nmS 
> .libs/ethereal.nmT
>  gcc -DINET6 "-D_U_=__attribute__((unused))" -Wall -W -g -O2 
> -I/usr/local/include -I/usr/local/include/gtk-1.2 
> -I/usr/local/include/glib-1.2 -I/usr/X11R6/include -o .libs/ethereal 
> pcap-util-unix.o capture_stop_conditions.o cfile.o conditions.o 
> disabled_protos.o pcap-util.o range.o ringbuffer.o timestats.o 
> version_info.o alert_box.o capture.o file.o filters.o g711.o 
> proto_hier_stats.o summary.o .libs/etherealS.o -Wl,-E -Wl,-E  
> -L/usr/local/lib gtk/libui.a -Lwiretap/.libs -lwiretap -Lepan/.libs 
> -lethereal -lcrypto -lpcre -lpcap -L/usr/X11R6/lib -lgtk -lgdk 
> -lgmodule -lglib -lintl -liconv -lXi -lXext -lX11 -lm -lz 
> -Wl,-rpath,/usr/local/lib
>  epan/.libs/libethereal.so.0.1: undefined reference to `ds_set_int'
>  epan/.libs/libethereal.so.0.1: undefined reference to 
> `register_mib_handlers'
>  epan/.libs/libethereal.so.0.1: undefined reference to `ds_set_boolean'
>  epan/.libs/libethereal.so.0.1: undefined reference to 
> `read_premib_configs'
>  epan/.libs/libethereal.so.0.1: undefined reference to 
> `sprint_realloc_objid'
>  epan/.libs/libethereal.so.0.1: undefined reference to `shutdown_mib'
>  epan/.libs/libethereal.so.0.1: undefined reference to `init_mib'
>  epan/.libs/libethereal.so.0.1: undefined reference to 
> `sprint_realloc_value'
>  epan/.libs/libethereal.so.0.1: undefined reference to `read_configs'
>  collect2: ld returned 1 exit status
>  *** Error code 1
>
>  Stop in /root/ethereal-0.10.4 (line 1274 of Makefile).
>  *** Error code 1
>
>  Stop in /root/ethereal-0.10.4 (line 1547 of Makefile).
>  *** Error code 1
>
>  Stop in /root/ethereal-0.10.4 (line 1201 of Makefile).
>
>
>   
>
>  
>
> My Inbox is protected by SPAMfighter
> 6123 spam mails have been blocked so far.
> Download free SPAMfighter today! 
> _______________________________________________
> Ethereal-users mailing list
> Ethereal-users@xxxxxxxxxxxx
> http://www.ethereal.com/mailman/listinfo/ethereal-users