Ethereal-users: Re: [Ethereal-users] How it captures the data of a group?

Note: This archive is from the project's previous web site, ethereal.com. This list is no longer active.

Date Prev · Date Next · Thread Prev · Thread Next
Date Index · Thread Index · Other Months · All Mailing Lists
From: "Philip" <etherphilip@xxxxxxxx>
Date: Thu, 13 Nov 2003 21:42:03 +0100
>> ----- Original Message ----- 
>> From: "Enzo Alvarez" <piaroas@xxxxxxxxx>
>> To: <ethereal-users@xxxxxxxxxxxx>
>> Sent: Thursday, November 13, 2003 9:31 PM
>> Subject: [Ethereal-users] How it captures the data of a group?


>> hi

>> I installed ethereal in linux red hat. It´s ok.

>> my networking is separate in group.
>> The group have various PC.

>> the question is:

>> How it captures the data of a group I specify?
>> How it captures the data of a PC I specify?

>> Thank.

you can set filters in ethereal
if you have want to capture packets from a PC, you can set an
IP filter for that specific PC.
like: ip = = 192.168.255.1

you also have all the other operators
not, less, equal, ....

set the filter:
click on filter | add expression | IP | source = =  <IP address>

to capture data from a group you have to simply specifiy the IP
range (e.g. source <= 192.168.255.1=

good luck



_______________________________________________
Ethereal-users mailing list
Ethereal-users@xxxxxxxxxxxx
http://www.ethereal.com/mailman/listinfo/ethereal-users